Search results

  1. B

    Quick question regarding u bolts and a 14 bolt swap

    Appreciate it man. Thank you.
  2. B

    Quick question regarding u bolts and a 14 bolt swap

    I’m swapping a 14 bolt in and it’s well documented. I know I need a conversion u joint. I have one on order. What I need to know is regarding the u bolts. The thicker axle tubes mean I need new u bolts and the plates. I bought a rear axle from a source through my work. I isn’t coming with...
  3. B

    Upgrade from jn3 brakes?

    I’ll just be buying new. I actually work as a service advisor and get discounts on stuff especially compared to retail. Just needed to confirm once the hub is switched it bolts in. So parts I need are jb6 calipers, rotors, and pads. Then the f44 hub and bearing assembly. Will this clear a...
  4. B

    Upgrade from jn3 brakes?

    Eh I just like big brakes in all honesty. After searching more it appears I should do jb6. So I guess back to the original question, it just bolts in after swapping the hub and bearings assembly? I found this. Appears to be bolt in but looking for some quick confirmation so I can get parts...
  5. B

    Upgrade from jn3 brakes?

    I had a separate thread but figured this was the way to go. I have a 89 k1500. I’ll be upgrading to hydroboost and a 1.25” master cylinder. I’ll also be upgrading the rear end from the 10 bolt to a 14 bolt. Apparently I have the jn3 rotors and calipers. I measured the rotors and they’re...
  6. B

    I got a F*rd

    There isn’t anything wrong with fords, as long as the e4od is built to be reliable. You have a c6 if I remember right from reading. I own a 1996 bronco that I am in the middle of a Restomod project. Built 351w and a zf5. Converted to an 8 lug using a f250 rear end and Frankensteined the...
  7. B

    Another hydroboost conversion question

    D Thanks. Does this look right?
  8. B

    Another hydroboost conversion question

    89 k1500. I have a hydroboost and master from a 94 k2500 going on. Waiting on the pedals because the place I got my nv4500 forgot them. - Do I need to swap out the Saginaw for one from a k2500/3500? I looked at one and it appeared larger than what’s on my 1500? Maybe perspective was messing...
  9. B

    Nv4500 swap questions

    This arrived today
  10. B

    Np241 to 32 spline shaft

    Ahh. Yeah it’s a 89 gmt400.
  11. B

    Np241 to 32 spline shaft

    Sorry for the multiple posts regarding somewhat related subjects. I have a 89 1500 I’m swapping a nv4500 for the 700r4. Yesterday I put an order in for a bw4401 but I realized there are some issues. The bw4401 is for an electric speedometer where my 89 is a mechanical speedometer. I...
  12. B

    Nv4500 swap questions

    Do you have a cross member/brace for it? I looked up the weight and it’s massive
  13. B

    Nv4500 swap questions

    I scored a borg Warner 4401. My concern is size considering I have a single cab stepside bed. Anyone have any input?
  14. B

    What manual transfer case to run with a nv4500?

    Ordered a bw4401 transfer case that came attached to the transfer case. This looks like a beefy ******* of a transfer case. Does it require its own crossmember?
  15. B

    I bought some led tail lights for my 89

    Eh is in my order history doesn’t match what was delivered. Doesn’t matter. They look good to me.
  16. B

    Repaint emerald green or color change to black?

    Dark cherry color of the newer chargers/challengers. Personally that green is the beige of the gm 90s paint colors, at least in my opinion. Go for something modern. Never do black. I’ll never own another black vehicle. My bronco is stormtroopered out but my 89 1500 is a nice blue shade...
  17. B

    I bought some led tail lights for my 89

    These ones. ACANII - For 1988-1998 Chevy Silverado GMC Sierra Suburban Tahoe Red Clear Lumileds LED Tail Lights Lamps Left+Right https://a.co/d/fMZAAjE
  18. B

    I bought some led tail lights for my 89

    I bought and installed get the other day. Wanted something a bit brighter because of getting rear ended so I opted for these Amazon special led tail lights. What are your thoughts?
  19. B

    What manual transfer case to run with a nv4500?

    I’ll call my connection through work to get it. By any chance do you know what bw unit it is? I’m only familiar with the bw1356 in fords.
  20. B

    brakes pulsating

    As someone who works in a repair shop, try power stop rotors and pads. Ac Delco stuff isn’t great and squeaks a lot. Have your rear drums and e brake looked at too.
  21. B

    What manual transfer case to run with a nv4500?

    I have a 1989 k1500 with a manual transfer case. I know nothing about Chevy transfer cases. Can I retain my current one or do I need a new one? I’m swapping in a nv4500 out of a 1995 3500.
  22. B

    Nv4500 swap questions

    Dude thank you. So in addition I assume it’s the same input shaft? I was curious about the floor pan. My bronco had an access tunnel that I just had to unbolt which was handy. I didn’t think about the studs for the flywheel. I’ll add that to my list. Had no idea about the pedal. I also...
  23. B

    Nv4500 swap questions

    I bought a nv4500 from a 1995 3500 diesel. It’ll be swapped into my 1989 stepside 1500. - the small black and Chevy diesel bolt patterns are the same, correct? - Do the automatic floor boards have provisions for the manual transmissions or do I need to cut a hole in my floor pan? - I need a...
  24. B

    Another Ls/L94 swap questions

    I acquired a l94 motor I’m going to swap into my 89. I’ll be running a Holley terminator. Mild cam, DOD delete, stock heads, shorty headers, upgraded lifters, stock rotating assembly. I’m also swapping a 14 bolt to the rear for reliability over the 10 bolt. - What are the best motor mounts to...
  25. B

    With all the options for the front, what’s the strongest front axle/IFS setup for a 89 1500?

    Looks like I actually have the larger booster. Now I just have to figure out how to order the jb6 brakes and what not.

Latest posts

Staff online

Members online

... and 20 more.
Total: 1,657 (members: 70, guests: 1,587)

Forum statistics

Threads
64,549
Messages
1,396,338
Members
51,973
Latest member
jackinback

Share this page

Top