Search results

  1. LPG PWRD

    Wtb clutch pedal.

    Not sure if you still need one, I have one $75 shipped
  2. LPG PWRD

    Propane Powered SAS Resto Project

    Stainless steel brake lines taking shape Rear hose awaiting other hoses to arrive Power steering oil filter and housing awaiting new home
  3. LPG PWRD

    Propane Powered SAS Resto Project

    New coolant tank, MSD box mounted, and new master cylinder awaiting lines Power steering cooler mount using stand-offs to allow 360* airflow, grill on for good
  4. LPG PWRD

    Can I get some pics of the firewall??

    i would've loved to fit that msd bow where the cruise control box goes, but it just doesnt fit there. so far this is what i got going on.
  5. LPG PWRD

    Propane Powered SAS Resto Project

    Started mounting firewall related items before i put fenders back on, that way i dont have to lean over them (will be replacing the nasty coolant recovery tank later this week with an OE one) Got clutch pedal bracket mounted and pedal installed
  6. LPG PWRD

    Can I get some pics of the firewall??

    Wow that helps out a ton... I could hump your leg
  7. LPG PWRD

    Can I get some pics of the firewall??

    everything mounted, mine is bare right now and need to know where everything goes
  8. LPG PWRD

    Can I get some pics of the firewall??

    Need some pics of the firewall area so I can figure out where I can mount my MSD box, coil and propane regulator without being in the way of other things that i dont have bolted on yet. Thanks, ~Steve
  9. LPG PWRD

    Propane Powered SAS Resto Project

    Finally got the frame back home and mounted on the frame (on little burnout tires) Now to get to work on it, too many parts, very little memory
  10. LPG PWRD

    Propane Powered SAS Resto Project

    3 layers of spectrum so far...
  11. LPG PWRD

    Propane Powered SAS Resto Project

    Removed heat shield on passenger side and degreased the whole bottom Sanded down the paint and removed the rust getting it ready for primer The bottom all etched primered up
  12. LPG PWRD

    Propane Powered SAS Resto Project

    Got the truck out of the garage and rolled it on its back to start working on the bottom. Underneath not in bad shape at all for being over 16 years old in ohio weather
  13. LPG PWRD

    Propane Powered SAS Resto Project

    Interior completely finished with 6 layers of Spectrum Sprayed a little on the rockers to protect them from boot damage
  14. LPG PWRD

    Bucking at around 45 mph??

    Damn, i thought i would bring something to the plate but these guys beat me. Remove your dist. cap and try and turn the rotor back and forth, there should be no movement, if you have movement, replace your dist or dist gear. The cam timing will be off and you will most likely have to do a relearn.
  15. LPG PWRD

    Engine cutting off, hard cranking, bouncy volt meter

    You can never have too many grounds, add some more beefy grounds and go from there.
  16. LPG PWRD

    Charging System Voltage

    16-18 volts is too high for some modules. anything lower than that is fine.
  17. LPG PWRD

    a/c problem

    hows your fan/fans? do you have efans? or is your clutch fan not as loud as it used to be? 9 times out of 10 with this condition of blowing cold, then after while warm, turn off for a bit then turn back on and majic cold air comes back out is high side pressure is getting too high. good...
  18. LPG PWRD

    Propane Powered SAS Resto Project

    Firewall all finished and painted with high temp gloss black. Interior getting coated w/ Second Skin "Spectrum"
  19. LPG PWRD

    Propane Powered SAS Resto Project

    Finally got around to finishing the front diff cover
  20. LPG PWRD

    Propane Powered SAS Resto Project

    Got the driveline caliper in, now its just a matter of making a bracket to hold it in place The 94 originally used the fan shroud to hold in the upper part of the radiator. Since I am running E-fans, I found a set of upper rad mounts from a 96 burb that will work perfectly.... to bad i had...
  21. LPG PWRD

    Propane Powered SAS Resto Project

    One more of interior primed Outside getting first layer Inside getting first layer Outside after 4 coats and drying... final look Close up of texture of product
  22. LPG PWRD

    Propane Powered SAS Resto Project

    Cab back from paint Firewall fresh from paint Firewall got sanded Then masked off for primer And all etched primer coated The firewall will be getting coated in Second Skin "Firewall"..... (pics soon) Interior completly...
  23. LPG PWRD

    Does anyone have a bed rug or seen one up close?

    i still want a roll up, not a fan of hard covers
  24. LPG PWRD

    Does anyone have a bed rug or seen one up close?

    the plan is to get a bed rug, truxedo lo-pro qt cover, shave the stake pockets and tailgate handle, and put door poppers on the tailgate with a lowering strut to smooth the release action
  25. LPG PWRD

    Rear seating question

    Dont wanna take credit for this, so heres the quote from an old thread

Latest posts

Members online

... and 25 more.
Total: 1,247 (members: 75, guests: 1,172)

Forum statistics

Threads
64,734
Messages
1,399,632
Members
52,321
Latest member
AustinRay90

Share this page

Top