Search results

  1. bretcopsey

    In search of 454SS seats. help!!

    Not mine, but I see this guy posting OBS stuff all the time https://www.facebook.com/share/dAYXeXL9jq328eHr/?mibextid=79PoIi
  2. bretcopsey

    Is there a mod to run 3157 brake and turn together

    What if you were to switch over to the Anzo lights that don’t use a circuit board, then modify the wiring? https://a.co/d/9njJ4PM
  3. bretcopsey

    GMT400 - Community Scan Tool

    I do still need it but will not be able to use it for a bit so will pass since there was at least one person after me wanting it. We ordered a new garage door that arrived 2 weeks early so my “free time” is spoken for.
  4. bretcopsey

    Dually Fender Marker Lights

    Yeah, noticed that the ambers jumped up to $76. They still have the reds listed at $45.99, but I wouldn’t be surprised to see that change soon. Agree with you on aftermarket stepping in. When I was searching I found all kinds of options for GMT800…
  5. bretcopsey

    Dually Fender Marker Lights

    I bought an OEM one from this seller last year. Wasn’t crazy about spending $45 for such a small part but needed it to replace a missing one. For LEDs I used www.superbrightleds.com OEM part numbers: Amber LH 5974617 RH 5974618 Red LH 5974619 RH 5974620...
  6. bretcopsey

    Trying to pop out rear lower quarter indent 99 suburban

    There are all kinds of diy videos on YT using hot glue-no idea if they really work or will work for your situation. I think the question to ask is no matter what you try on your own, what if you make it worse than if you hadn’t done anything? Are you willing to dive in and learn how to get...
  7. bretcopsey

    '50 Chevy 3100

    Smart move here. I’ve had my 51 3600 for 18ish years lingering in the garage and have never driven it. Tucked in behind is my 68 Camaro, on a rotisserie for I can’t remember how many years. I tore it back apart in the mid 1990’s. At this point I’ve conceded that they’ll get worked on...
  8. bretcopsey

    GMT400 - Community Scan Tool

    I’d like to get on the list.
  9. bretcopsey

    Phone Mount (95+)

    Remaining pics
  10. bretcopsey

    Phone Mount (95+)

    I don’t have any “during” pictures or of it back in the cab, but here are some various pictures showing “after.” I removed the suction cup from the base and managed to fine some hardware laying around to bolt that in place. I trimmed out the small notch the fed the arm through and reattached...
  11. bretcopsey

    Phone Mount (95+)

    I bought one of these then modified the base mount to remove the suction cup then placed it so that the articulating arm assembly is bolted to the inside of the dash mounted cup holder. It required cutting a small, barely noticeable notch into the face of the cupholder, inside the pull handle...
  12. bretcopsey

    Double din that doesn’t require cutting dash?

    This is a bit outside my wheelhouse, but the mounting on the back of this unit appears it would be adjustable vertically. It’s a 10 inch screen-not sure if that still could cause issues but at least appears to show some possible hope. Also, thinking about when I installed my double DIN, the...
  13. bretcopsey

    Double din that doesn’t require cutting dash?

    For something requiring absolutely no cutting you may have no choice but to go the floating screen route. For something requiring minimal cutting, units that don’t play discs generally have shallower bodies so don’t need as much cutting as a unit that plays discs that will go deeper into the...
  14. bretcopsey

    Cab Lights

    My original roof markers were in horrible shape so I bought 5 of these https://www.oreillyauto.com/search/v/a/3884/automotive-truck-1995-gmc-c3500-pickup-rwd?q=Dorman+69995 I also got a tube of permatex gasket maker and ran a small bead around each hole where the light socket goes through roof...
  15. bretcopsey

    Dkuble din bezel kit

    It’s a jig/fixture to drill holes to relocate the HVAC control. The double DIN requires moving the HVAC downward roughly 1/2” from memory. See page 3 http://metraonline.com/files/products/INSTDP-3003_web.pdf
  16. bretcopsey

    Aftermarket front bumper?

    I’m debating adding fog lights but hesitant about the factory location in the air dam due to how low my truck sits. I’ve seen a few options to mount lights in the bumper and came across this picture but cannot find any showing this installed to get a better idea of how it would look. Anyone...
  17. bretcopsey

    HOW TO Convert From Drum Brakes to Disc Multi Part Video Series

    I pulled them out but cannot locate my calipers. Everything here is in chaos due to a driveway replacement over the past week. I’ll look some more in the morning. In the meantime, I grabbed these ROUGH dimensions using iPhone to measure if it helps to understand the rough size. In no way is...
  18. bretcopsey

    HOW TO Convert From Drum Brakes to Disc Multi Part Video Series

    I’ll have to dig them out to measure. I don’t think I was ever able to confirm through online research and stumbled across those for sale so just pulled the trigger.
  19. bretcopsey

    HOW TO Convert From Drum Brakes to Disc Multi Part Video Series

    I found them being sold by a member on Pirate4x4.com and bought a pair. https://www.pirate4x4.com/threads/flange-for-newer-disc-brakes-on-older-14-bolt-axles.2708223/#post-45016029 He’s also on FB-Jack Badossian
  20. bretcopsey

    HOW TO Convert From Drum Brakes to Disc Multi Part Video Series

    @95silverado, are you 100% going the disc conversion route and no longer in need of replacement drum backing plates? A trip to the yard may happen this weekend but I’d rather not mess with trying to score those if they are no longer needed. Also, since I have some interest in a rear disc swap...
  21. bretcopsey

    Has anyone thought of custom machining a brake mouting flange?

    I’ve seen this site advertised somewhere recently. Seems might be worth a shot for something like this? https://sendcutsend.com/
  22. bretcopsey

    Overhead Console Mods

    I posted a link above where the wiring was explained. I honestly don’t remember exactly where I tapped in but did use a switched 12+ source so that you have to have the key on for it to work. I didn’t bother with wiring in the button illumination.
  23. bretcopsey

    HOW TO Convert From Drum Brakes to Disc Multi Part Video Series

    *oof! I updated my post to remove the links, don’t want to cause any heartburn. Not sure how that is reflected since my original post was quoted
  24. bretcopsey

    HOW TO Convert From Drum Brakes to Disc Multi Part Video Series

    I also just remembered there is a 94 3500 DRW at my local Pick Your Part. It will be the weekend after this coming that I can make it up there, but I can see what I can do to help if the axle is still there and backing plates are in decent shape.
  25. bretcopsey

    HOW TO Convert From Drum Brakes to Disc Multi Part Video Series

    Take this with a grain of salt as I know none of it as certain to be accurate: Online search turned up OEM part numbers 15622343 & 15622344. Searching on those numbers I found a hit claiming to have multiple sources for those part numbers and ability to order each. [QUESTIONABLE LINKS REMOVED]...

Latest posts

Members online

... and 6 more.
Total: 1,628 (members: 56, guests: 1,572)

Forum statistics

Threads
64,556
Messages
1,396,512
Members
51,991
Latest member
johnjuan88

Share this page

Top