Search results

  1. Spareparts

    I’m a DA…what maintenance have you screwed up?

    A LONG time ago in a town not too far away i have to admit. I was in my early 20s working on a 1973? Mercury Capri with a V6. For some reason i remember it being a German V6, I had put new rods and main bearings in it from Underneath. Finally had the oil pan on and engine bolted back up...
  2. Spareparts

    Another 454 Vortec Build Thread - Documenting, Q&A, Help

    Seem odd. My FPR had a 1 1/2in piece of vacuum hose that hooked to the back of the lower intake.
  3. Spareparts

    Another 454 Vortec Build Thread - Documenting, Q&A, Help

    Found this pic of mine. After changing mine a couple of times, I found the best place to pry is where the red arrows point.
  4. Spareparts

    Another 454 Vortec Build Thread - Documenting, Q&A, Help

    Put a drop of oil on the clips where you need to gently pry them off.
  5. Spareparts

    Another 454 Vortec Build Thread - Documenting, Q&A, Help

    What do you mean 4 psi low with return line punched off? If the fuel pump return line is actually pinched off the pressure should jump to over 70PSI. Mine went up over 80 PSI with a new pump. If you are 4 PSI low with the return line pinched off your fuel pump is shot or fuel filter is almost...
  6. Spareparts

    Another 454 Vortec Build Thread - Documenting, Q&A, Help

    After thinking about this a minute, I don't think you had the lines pinched off totally. If you had a pressure line pinched off, you would get 0 pressure reading. If you pinch the other off, you should get way more pressure.
  7. Spareparts

    Another 454 Vortec Build Thread - Documenting, Q&A, Help

    Either way the pressure when testing a pinched off return line should be over 70PSI. If it bleeds off that much with the return line pinched, you mostly likely have bad injectors or less likely but possible to have a bad line in the tank at the pump or a bad check valve at the pump or just a...
  8. Spareparts

    GOT a van!

    Drove it to work and home with a little town/hwy driving. Nothing changed. Still idles the same (smooth) starts the same and feels the same driving. Im sure new plugs have helped something, what though, i dunno.
  9. Spareparts

    GOT a van!

    The misfires were so few that in my experience, it never would have set a code.
  10. Spareparts

    GOT a van!

    Well i was wondering if i should or not after selling my suburban but after thinking about it the van is more or less, mostly a GMT 400. The new plugs were gapped at .060. I have messed with plug gaps on the same 7.4l before and did not see any real difference so i just left em alone.
  11. Spareparts

    GOT a van!

    Changed the spark plugs today. Had a few random misfires according to the scanner. I could not tell when driving as it's smooth running engine. The old plugs were shot!. Almost all the gaps measured .075 to .085, One measured .050. Did not drive it after the change so i'll see how it runs tomorrow.
  12. Spareparts

    Another 454 Vortec Build Thread - Documenting, Q&A, Help

    Just because a vehicle was not sold in CA does not mean it can't have CA emissions. The only way to know for sure is RPO codes.
  13. Spareparts

    Another 454 Vortec Build Thread - Documenting, Q&A, Help

    Here is what i would do. Hook up a fuel pressure gauge. Pinch off the return line under the driver's door inside the frame rail. Turn the key on and if the pressure jumps over 80PSI, your pump is probably ok. If the fuel pump can build that pressure then you have a bad/wrong FPR. The bleeding...
  14. Spareparts

    Another 454 Vortec Build Thread - Documenting, Q&A, Help

    Many are listed as fitting, but most are the wrong pressure. I would not order a single one unless the pressure is listed in the description so you know it's the proper one. I ordered 3 or 4 before i found the proper one.
  15. Spareparts

    Another 454 Vortec Build Thread - Documenting, Q&A, Help

    Be careful on what FPR you order. Several wrong ones will fit, but only a few have the proper pressure and i can not remember the number of the proper one.
  16. Spareparts

    GOT a van!

    Have i mentioned i HATE working with wood:suicide: Few interior pics of my progress. It is usable now but a long way from being done. I plan on covering the box and drawer in marine vinyl but will wait till it's about the last thing to do. Still need to get some wiring done and order a 12V tv...
  17. Spareparts

    GOT a van!

    Here is the reason for the circuit breaker new the battery I added. It will feed the 20A DC-DC battery charger that will charge the house batteries. The house batteries with run a 2000w Renology inverter, 12v fridge/freezer, LED lights, 12v LED outdoor lights. Few other things i have not thought...
  18. Spareparts

    Apps that read CMP Retard Offset?

    I was also using Dash Command to read cmp, worked great. Later i seen a good deal for a Snap on Solus pro scanner that will read up to 2010 for $300 and bought it. WAY better than Dash Command.
  19. Spareparts

    Weird question about a bypass filter

    My buddy's dad had a Franz filter on a Toyota motor home with 230K. I was there one day when they were changing the oil and filters. I remember he had about 4k since the last change. The old oil still looked new. The Franz filter used toilet paper roll for the filter medium. When it was taken...
  20. Spareparts

    GOT a van!

    Forgot pics. Nothing special. Forgot to mention after. The voltage is @ idle 14.6 at battery and 14.5 at cigarette lighter.
  21. Spareparts

    GOT a van!

    Finally did some electrical work today. Before started i check the voltage at the battery (14.5v) running at idle. Also checked at a cigarette lighter 13.3v at the same time. Started by replacing the battery with a new top post AGM. I also replaced the main fuse box power cable under the hood...
  22. Spareparts

    Apps that read CMP Retard Offset?

    Found this on a van forum. I have not tried it. Supposed to work for CMP. OBD2 Mode and PID: 221301 Long Name: Cam Position Retard Offset Short Name: CMPRET Minimum Value: -100 Maximum Value:100 Scale Factor: x1 Unit Type: degrees Equation: ((Signed(A)*256)+B)*0.024) OBD Header to use: 6C10F1...
  23. Spareparts

    How to spruce up these old rims

    Are the rims weight rated for a car or truck?
  24. Spareparts

    Aluminum wheel spacer fail on 14bff

    Never torqued them. Just tightened the heck out of them like usual. Rechecked them a week later. Still tight as heck.
  25. Spareparts

    Shocks on a Budget

    After having Rancho 5000's and swapping to Bilsteins i could not believe how much better the Bilsteins were over the Ranchos.

Latest posts

Staff online

Members online

Total: 1,206 (members: 43, guests: 1,163)

Forum statistics

Threads
64,551
Messages
1,396,394
Members
51,979
Latest member
josebrnstrs

Share this page

Top