Search results

  1. 618 Syndicate

    Headers changed

    If the new heathers doesn't have a hole where the old heathers did, I don't think you have your hands on a heathers...
  2. 618 Syndicate

    Really wish ppl would stop bringing me trucks with hydraulic fluid in trans

    Escalating discipline. Posts deleted, warnings issued, account suspended, and ultimately banned.
  3. 618 Syndicate

    Really wish ppl would stop bringing me trucks with hydraulic fluid in trans

    Not permitted on this site. Plenty of other spots on the interwebs for it, strictly enforced policy against it here.
  4. 618 Syndicate

    What rim offset to make it look «normal»?

    You've heard it before because it's true. My guess is an importer or upfitter swapped the axles prior to import. I'm not aware of GM making any 8 lug half ton GMT400's and I've been around them since they were first introduced. Do you have the option codes available? Should be in the glovebox...
  5. 618 Syndicate

    What rim offset to make it look «normal»?

    8 lugs is a 2500 unless someone has swapped the axles.
  6. 618 Syndicate

    Name

    @df2x4 @kennythewelder @Old77 @Shaggy
  7. 618 Syndicate

    Lowering a 4x4

    Could be a GMT800 also.
  8. 618 Syndicate

    Worst OBS mods

    Yeah, sure do. More importantly, I literally could not care less about what other people think of my choices. I have never, and will never build a truck to get anyone else's approval.
  9. 618 Syndicate

    1999 Gmc seats to a 1996 Suburban K1500

    That's not south....lol. I'm closer to Memphis than Chicago.
  10. 618 Syndicate

    C2500 cranks but no start, while flashing security light 3 times

    Pro tip: hook a battery charger to the truck. YOU MUST WAIT 10 MINUTES for the light to stay out or the process will not work. Not 9 minutes and 30 seconds. This is where most people screw this up. Also the 10 seconds between cycles is important as well.
  11. 618 Syndicate

    C2500 cranks but no start, while flashing security light 3 times

    Security relearn will take about 30 minutes, that's your short term fix. It WILL happen again. The only permanent fix is to get the VATS tuned out of the ECM.
  12. 618 Syndicate

    1999 Gmc seats to a 1996 Suburban K1500

    Way down south here.
  13. 618 Syndicate

    1999 Gmc seats to a 1996 Suburban K1500

    The second row seats are different between Suburbans and the Tahoe/Yukon twins. The fronts are the same and will bolt right up, but the second row will need to be frame swapped.
  14. 618 Syndicate

    1999 Gmc seats to a 1996 Suburban K1500

    Where in Illinois are you?
  15. 618 Syndicate

    1999 Gmc seats to a 1996 Suburban K1500

    Yes, as long as you're swapping bench to bench or bucket to bucket. If you're swapping one for the other it will still work, just requires a little more effort.
  16. 618 Syndicate

    1999 Gmc seats to a 1996 Suburban K1500

    There is no difference between chevy and gmc seats of the same era trucks.
  17. 618 Syndicate

    7.4 swap c1500 tight on the passenger side

    Post a picture of the headers. I'll bet they're wrong. GMT400 specific headers don't require modification to anything, especially the frame, to fit.
  18. 618 Syndicate

    89 k1500 gets warm only on the highway

    Block drains may require some unclogging with a pick to get them to flow.
  19. 618 Syndicate

    5.3 + manual swap

    Don't be afraid of the smaller motors. You can build a better 4.8/5.3 for the cost of a stock 6.0, Also remember that GM put 4.8's and 5.3's in literally millions of trucks that accumulated billions of miles doing truck shìt, they're perfectly capable and far cheaper. All the parts needed for...
  20. 618 Syndicate

    BBK Exhaust Header

    "Fitment issues" happen when people try to make other headers work. Buy long tubes for a GMT400 and you'll be fine.
  21. 618 Syndicate

    Worst OBS mods

    Lifted 2wd trucks and wheel spacers Didn't wanna go to your birthday party anyway...
  22. 618 Syndicate

    Square body headers on C1500 454

    It's the frame.
  23. 618 Syndicate

    Square body headers on C1500 454

    I can provide my own reason. Square headers will not fit the 400 frame shape.
Top