Search results

  1. 93blazehorse

    Insight needed

    I also talked him into the tru track because if I had the bones laying around I'd do exactly that, but that being said you can't beat free
  2. 93blazehorse

    Insight needed

    It's a bit of a long story, I did the original swap in another rear for him and long story short he wrecked his rear and he bought a new rear differential from GM, ( fell asleep while driving and spun out into a curb bending his Axle and Axle tube) I salvaged the tru track from the old rear and...
  3. 93blazehorse

    Insight needed

    So I have my 93 blazer, 4x4 1/5 ton with the 10 bolt rear. My buddy has a 2010 Tahoe and he put a tru track in his truck and is offering the g80 locker to me for my truck, I've checked Yukon gears site and we are both 30 spline axles? What i want to know is will this work in my rear. Does...
  4. 93blazehorse

    93 4l60e to 700r4 swap

    If my truck didn't have 290 thousand on it I'd do that, I am kind of hard up for cash and like I said I have a new unit, I have the whole truck too so little parts I'd need I'd have, I know in 92, they still used a TV cable and I know93 is the first year of electronic transmissions, the truck is...
  5. 93blazehorse

    93 4l60e to 700r4 swap

  6. 93blazehorse

    93 4l60e to 700r4 swap

    Hey guys, so my transmission has been acting up, looking at the trouble shooting chart it's #25. my torque converter shudders in 4rd and sometimes in 3rd. It just so happens that I have a 90' z71 with a known rebuilt transmission by a local guy. The transmission has 8,700 miles on it, my blazer...
  7. 93blazehorse

    93 4l60 overdrive shudder

    i would think itd be simpler than that, wouldnt i be able to cut whatever powers the switch and leave t at that? i mean again i dont know exactly what im doing with electronics if it was a non computerized version id have more of a clue as to what im doing, but it isnt so i dont.
  8. 93blazehorse

    93 4l60 overdrive shudder

    the trans has been acting up in my 93 blazer, i have a shudder in 4th going up slight grades when the tc is locked, you can step on the brakes or kick it down and it goes away, now my trans is due for a service, would that help the shudder? or am i looking at bigger problems perhaps? the trans...
  9. 93blazehorse

    1993 350 blazer ac issues

    i took the compressor apart already, the actual "rod" that compresses the piston has cracked, the only thing i can think to do would be to swap in the guts of another r4 compressor, but i dont quite know the interchange between the compressors, like if the guts from an earlier one would work in...
  10. 93blazehorse

    1993 350 blazer ac issues

    so some time ago my compressor bailed out, i had a spare lying around that i threw in but the lines didnt match up, from what i heard 93 and 94 are special years with the compressor lines, is this true? im trying to find a replacement and get my ac working again, any info or part numbers or...
  11. 93blazehorse

    1993 350 blazer ac issues

    so some time ago my compressor bailed out, i had a spare lying around that i threw in but the lines didnt match up, from what i heard 93 and 94 are special years with the compressor lines, is this true? im trying to find a replacement and get my ac working again, any info or part numbers or...
  12. 93blazehorse

    1993 Blazer gauge cluster swap

    yes! hes right! i work 8 hour shifts at a diesel place my brain is done after im off, but yes! thats good to know, i think i know what im doing this weekend! thanks so much guys!
  13. 93blazehorse

    1993 Blazer gauge cluster swap

    Hey guys, Ive found a 1994 suburban cluster i want to put into my truck, mine has oil temp batt and fuel and the suburban has all that PLUS a tachometer (which is something i really want in my truck) now is this a plug and play deal or would i have to mess around with some wires to make it work?
  14. 93blazehorse

    how to workaround a broken fuel line on a sending unit

    unless i can figure something out, its looking like im stuck with getting a new sending unit
  15. 93blazehorse

    how to workaround a broken fuel line on a sending unit

    ah i dont, it busted right at the flare nut, and i really cant afford to wait a couple of days
  16. 93blazehorse

    how to workaround a broken fuel line on a sending unit

    so my fuel pump dies shortly after i did the ultimate tbi stuff, (stage 2? throttle body portwork adjustable regulator) i know its the pump because i kept banging on the tank to get it to my shop. i have a tpi fuel pump im all set to put in but wouldnt you know it? the return line crumpled away...
  17. 93blazehorse

    1999 vortech 350 into a 93 blazer

    hey guys, so my 383 is on its way out, i happen to have a 99 chevy express van that has a 350 in it, ive done some homework and i know i have some egr magic to make happen. so does anyone have any experience with this? or any idea how to make this work? id like to retain the tbi if i can, but if...
  18. 93blazehorse

    HVAC help

    http://www.chevytalk.org/fusionbb/showtopic.php?tid/201058- first picture the linkage to the left is what i need in my truck.. i dont know if it helps, but i really do need to find those bits..
  19. 93blazehorse

    HVAC help

    so we are coming into the winter months, and i have a small problem with my front defrost, i have the "brain box" digital setup, and for whatever reason im missing three pieces, the actuator arm (that goes on the defrost flap stud) and the arm assembly that has the spring (part that hooks up to...
  20. 93blazehorse

    Not trying to break anything...

    also, id be fine with a FF, but i dont know if the made them as as a SRW
  21. 93blazehorse

    Not trying to break anything...

    i'd figured id run with the 4l60E, its the same as a turbo 350 but with electronic shift points vs a detent cable and overdrive ( i know to not use overdrive while towing) granted a 4l80E would be stronger, i figure heat is the main killer which is why i asked about the overkill cooler, it isnt...
  22. 93blazehorse

    Not trying to break anything...

    Okay, hi everybody! I'm new to forums and i happen to have a question for you guys.. i run a small shop and i usually find myself towing cars down to my garage. My truck is a 93 4x4 blazer, it has over 263,xxx on it, 5.7 TBI and a 4L60E trans and a 10 bolt rear with 3:42s in it. I already know...

Latest posts

Members online

... and 13 more.
Total: 1,541 (members: 63, guests: 1,478)

Forum statistics

Threads
64,422
Messages
1,393,725
Members
51,629
Latest member
Nostradamus1214

Share this page

Top