Search results

  1. InsanePyro

    Weird door pin bushing issue

    So the door itself then? Maybe thats why someone put bushing on the door side on the bottom hinge
  2. InsanePyro

    Weird door pin bushing issue

    Well I had to drill the bottom hinge so those are definitely round. The top ones were worn a bit but I really didn't think it was that bad. I still had to tap them into place. I do think the hinge is pulling away on the top one though
  3. InsanePyro

    Weird door pin bushing issue

    They look like original. For sure not bolted. I ended up using a bushing on the cab and door itself on lower hinge. I did have drill the hinges a bit. But every bushing used was GM. Its all together and looks snug but the door still droops a wee bit. The striker and latch look pretty beat but if...
  4. InsanePyro

    Weird door pin bushing issue

    I did end up getting them from GM. They still didn't fit on the bottom hinge. Drilled out the top one to make it fit, waiting for my drill to charge to drill the bottom
  5. InsanePyro

    Weird door pin bushing issue

    Went to replace the door pins and bushings on my front drivers door. Got everything apart and cleaned up. Popped the bushing in the top hinge no problem. Went to the bottom and neither bushing fits on top or bottom of the lower hinge. And just so I know I'm not crazy I actually checked the...
  6. InsanePyro

    Oil Pressure-Damage?

    Did you hear it knocking?
  7. InsanePyro

    The Stupid Engine Questions Thread

    Turns out my dumbass forgot the knock sensor when I put everything back together. Theres a way to bypass the fuel cut off on the oil pressure switch and my guess is one of the POs did it at some point cause she runs like a gem now
  8. InsanePyro

    Knock sensor leaking best way to takle it?

    Is it best to replace the knock sensor while doing an oil change or does not alot come out?
  9. InsanePyro

    The Stupid Engine Questions Thread

    Theres nothing to fix. If anything my way is better. I have no interest in re enabling Chevy's crappy gauge. So as I said I was hoping there was a bypass for the oil pressure sender. Which apparently there is according to this http://www.chevytalk.org/fusionbb/showtopic.php?tid/234210/ So I...
  10. InsanePyro

    Best exhaust option for the next few years?

    Don't do true duals unless your engine is built. Sounds like junk. Cats are up to you assuming you don't have to deal with emissions. All they really do is make the exhaust smell a bit less harsh and help mpg a bit
  11. InsanePyro

    The Stupid Engine Questions Thread

    Just because I don't want to follow your specific advice does not make me a know it all. Theres usually another way to do something. Such as the idler pulley...I'd still be messing around trying to get it to line up if I did things your way, instead I thought about it for a bit and just took it...
  12. InsanePyro

    The Stupid Engine Questions Thread

    I know it right now! Its the sensor I don't feel like messing with!
  13. InsanePyro

    The Stupid Engine Questions Thread

    It runs fine I just want the CEL gone. I really have no desire to mess around with those pipes and crap. Much rather just jump the harness.
  14. InsanePyro

    The Stupid Engine Questions Thread

    I installed a mechanical oil pressure gauge on my Suburban...now its throwing a code for the fuel cut off circuit...what do I do?
  15. InsanePyro

    The Stupid Electronics Questions Thread

    I installed a mechanical oil pressure gauge on my Suburban...now its throwing a code for the fuel cut off circuit...what do I do?
  16. InsanePyro

    Am I crazy for attempting this??

    Doesn't just putting it in D instead of OD prevent lockup?
  17. InsanePyro

    The Stupid Engine Questions Thread

    Well I know that...idler pulley/bear is brand new. Has maybe 10 minutes of run time.
  18. InsanePyro

    The Stupid Engine Questions Thread

    Its a '93 5.7L
  19. InsanePyro

    The Stupid Engine Questions Thread

    Whenever I run my Suburban the belt slowly walks about halfway off the idler pulley...what gives? Is there supposed to be dust shield like thing on the back? I have the one on the front but can't remember if there was one on the back or not
  20. InsanePyro

    Moroso center bolt wire loom set

    When I replaced the engine in mine I lost/broke most of the stock ones so these should be a nice replacement
  21. InsanePyro

    Moroso center bolt wire loom set

    They work good for you? No crossfire issues or anything?
  22. InsanePyro

    Moroso center bolt wire loom set

    Final price to 53018?
  23. InsanePyro

    The Stupid Engine Questions Thread

    Whats the best way anyone has found to stop the oil cooler lines from leaking? I put new ones in on my new engine and a month later they were weeping
  24. InsanePyro

    New engine knocking

    Mines a Spartan/ATK. I've heard they're massive pains as well as far as warranty stuff. I wanted to get one from GM but they dont even do remans and a engine from them was double the price as its a new engine, not reman
  25. InsanePyro

    New engine knocking

    Yeah its in the bottom. I was trying to be optimistic. Seems to be loudest by the balancer

Latest posts

Members online

... and 25 more.
Total: 1,809 (members: 75, guests: 1,734)

Forum statistics

Threads
64,457
Messages
1,394,535
Members
51,716
Latest member
Moesobs95

Share this page

Top