jdhaas05
Newbie
I can’t seem to get the gear to slide over the snap ring. Any tips to get this job done.
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Appreciate your response. I’ll try that tonightMake sure that the splines onthe axle shaft are not damaged. Align the gear splines with the axle splines and give it a firm smack with a dead blow hammer, some times they can be stubborn.
Make sure that the splines onthe axle shaft are not damaged. Align the gear splines with the axle splines and give it a firm smack with a dead blow hammer, some times they can be st
In your opinion is it better to have the snap ring in the gear or on the shaft before trying to hit itMake sure that the splines onthe axle shaft are not damaged. Align the gear splines with the axle splines and give it a firm smack with a dead blow hammer, some times they can be stubborn.