Recent content by Smitty1021

  1. S

    Blower fan speed problem

    So far each response is the only 3 things I have left to look for haha. I was thinking relay or resistor but as I'm thinking about it, my controls on my panel are acting up. The recirculation button won't work. The truck won't provide hot air making me wonder if the module is triggering the...
  2. S

    Blower fan speed problem

    kind of a weird problem today. Had my AC going with 0 issues yesterday. Hop in the truck this morning and the blower isn't working at all. Found out the ground wire is faulty somewhere in the circuit. So I jumped the ground but now the blower won't work on Hi. Any ideas? Also noticed...
  3. S

    Early nv4500 hydraulic system

    Correct. Had a problem before when I did my LS swap. Tried bleeding, no luck. Bought a pre-bled system, everything worked great. Little sticky sometimes, but it worked. Blew MC out yesterday, replaced just MC, been trying every form of bleeding procedure besides vacuuming the system, no...
  4. S

    Early nv4500 hydraulic system

    I've about had enough of the nv4500 hydraulic system. Yesterday I had a 2 month old system blow out on me. The plastic MC blew out. This is the second one I've had blow out on me. I went to the local advance auto and picked up just a MC that happens to be a steel one. I have had nothing but...
  5. S

    HVAC controls not working

    Recently did a LS swap in my 95. Sent the computer back to the tuner a second time to screw with the tachometer settings. Anyway, prior to sending it back, all of the HVAC controls worked. After plugging the computer back in, now they do not work. I do believe it is coincidence but just some...
  6. S

    HELP!! Clutch engagement issue

    I had a 4l60e so that issue wouldn't apply to me. Swapped in a whole new system. Works good now. Does brake fluid thin out when it gets heated up? I'm wondering if this is the case since I have headers and since it only happened when the truck got warm.
  7. S

    HELP!! Clutch engagement issue

    I picked up a Mitey vac. After about ten minutes I got frustrated with it and decided to scrap the whole bleeding idea and grab a complete new setup. It's working great now
  8. S

    HELP!! Clutch engagement issue

    Your right disengaging sorry. Yeah it's an external slave. I picked up a hand vacuum pump for a brake system and am going to give that a go. If not, I'm probably just going to pick up an entire pre-bled system. Hopefully the vacuum pump does the trick.
  9. S

    HELP!! Clutch engagement issue

    Update: drove to work this morning. Same thing as yesterday. Towards the end of my trip after the truck was warmed up, I began to have issues with the clutch engaging. It seems like my grabbing point for the clutch slowly disappears. I can feel the pedal give when the clutch engages but as...
  10. S

    HELP!! Clutch engagement issue

    That's what I was possibly thinking. Idk what could have happened to it by simply sitting for a year.
  11. S

    HELP!! Clutch engagement issue

    0 pedal play. Firm pedal all of the way down.
  12. S

    HELP!! Clutch engagement issue

    Trying to be a little urgent about this since I need the truck this upcoming Friday. Although may be a long description, I'll try to include as many details the first time around. Did a 92' nv4500 swap a couple years back. Everything worked fine except having a tad of an issue getting the...
  13. S

    Walbro 255 lph fuel pump

    For the LS guys, I have a walbro 255 lph inline fuel pump I'm looking to sell. It's brand new still in box. Decided to take a different route. $90 shipped.
  14. S

    Fuel pump

    Was wondering if your able to run an inline fuel pump along with the in tank fuel pump? If you can't run both pumps at the same time, can you disconnect the old in tank tbi pump and have the inline pump still work? May be a stupid question but I haven't been able to find out the purpose of...
  15. S

    Cam for lq4

    Man decisions decisions lol. All I know is I want something focused on low to mid range. Both the 224 and 228 seem to accomplish that. I think I'll just look into both cams and do a comparison. I definitely need to do some more research in the science of cams as well. After reading your...
See more

Latest posts

Members online

... and 7 more.
Total: 1,710 (members: 57, guests: 1,653)

Forum statistics

Threads
64,384
Messages
1,392,712
Members
51,536
Latest member
Lary

Share this page

Top