Recent content by Schwarzweix

  1. Schwarzweix

    ABS cable Location

    Hello, as I disassemble my front axle I forgot to take some pictures :-( - can someone of you tell me how the cable of the ABS sensor is mounted? Thank you :-)
  2. Schwarzweix

    Upper control arm bushings

    Thanks guys...
  3. Schwarzweix

    Upper control arm bushings

    Hello, can someone tell me how the bushing have to be installed in the upper control arm? I dissasembled it and forgot to make pictures. Now I don´t know how to re-assemble it. Shows the larger diameter of the bushigs to the front or to the rear? Perhaps someone can send me a picture of that...
  4. Schwarzweix

    Do I have to dismount the axle?

    Thank you guys for your help. So I will try it again today with raw force :-) @98_k1500: This is a picture of my 1998 C3500. In the German papers is that Date 07/01/98 as first date of registratiion. It is possible that the car is a little bit older anyway... VIN:1GCGC33R2W...
  5. Schwarzweix

    Do I have to dismount the axle?

    ..to get off the brake drum? I got a big problem on my rear brake drums. They wont get off. I found the small inlet for the adjustment screw and pulled it back. Now the pads should have be enough place to the drum. I tried it with a hammer and much oil and anti rust. but the drum won´t move...
  6. Schwarzweix

    Front axle control arm bushings sleeves (1998 C3500 RWD AT)

    Hello there, i bought the Energy Suspension Hyperflex Bushing Kits 3-18107R and yesterday I wanted to reassemble my front axle - but then I figured out that I have to reuse the old sleeves for the upper and lower control arm. Unfortunatly they were destroyed at disassembling. Does anyne...
  7. Schwarzweix

    Help for a newbie...

    ok, thanks a lot for that hint... That will protect me against unnecessary work and much complications... Europe / US isnt not so easy to re-send / change wrong sent parts. So, someone can help me with my question about the rear axle? :-D
  8. Schwarzweix

    Help for a newbie...

    hm - thats interesting. I searched again and this is the result:
  9. Schwarzweix

    Help for a newbie...

    Do i need to replace the rear axles position when I do a 4 inch drop on the rear with an shakle and hanger kit? Is it necessary to put a c-notch in the frame or would it fit just as it is? I want to buy these parts from Summit when I am over there: Front 3": Shocks: DJM 1315 Springs...
  10. Schwarzweix

    Lowering Kit 3" front 4" rear wanted

    Thanks - i will check that out... (Craigslist is not well known in Europe / Austria) :-)
  11. Schwarzweix

    Headrests wanted

    I want to mould out some string of foam for more lateral support before i get it to the saddler... A little bit like bucket seats... My problem is that the most shops and sellers are not shipping to europe. I am started another treat if someone can help me in such cases. Yeah, i thougt also as...
  12. Schwarzweix

    Headrests wanted

    I hope you can see enough - otherwise i will send you a better pic tomorrow...
  13. Schwarzweix

    Headrests wanted

    Should I sent you a pic of my actual Headrests? Yes i would need it complete. I have to weld the complete mechanism in the bench frame, so its not important if they originally would fit or not... Color isn´t important too, because i put the whole interior to an upholsterer to cover it with...
  14. Schwarzweix

    Headrests wanted

    hi there, i am searching for two headrests, cause in Austria every passenger have to had a headrest. so i have to install two more - one in the front and one in the rear for the middle passenger... Thanks in Advance BR
  15. Schwarzweix

    Lowering Kit 3" front 4" rear wanted

    Hi there, does anyone do have lowering parts for my 1998 C3500 CrewCab? I am in California and Nevade (San Franciso - Los Angeles - Las Vegas - San Diege) from 2014/05/25 - 2014/06/10. So it would be easy to sent or to pick up directly if its on my way... BR
See more

Latest posts

Members online

... and 7 more.
Total: 1,552 (members: 57, guests: 1,495)

Forum statistics

Threads
64,590
Messages
1,397,079
Members
52,058
Latest member
jpkinnin

Share this page

Top