Recent content by monsterwake

  1. M

    Blower only works on 2nd and 3rd speed

    I had to replace the resistor and the fan on mine.
  2. M

    Tbi fuel pressure gauge adapter

    I used the harbor freight one this past weekend. It came with the tbi adapter. I was scared to keep in on there though. It sounds like it is normal to do this.
  3. M

    What to look at, for fixing lopey idle and running rich?

    I agree with EVAP. My truck is a mud wasp magnet so I am sure something is clogged up somewhere. I just need to find the problem without buying a bunch of parts. I appriciate all of the info from everyone.
  4. M

    94 GMC 350TBI stall

    Fuel pressure was good. Replaced the fuel filter and dumpeda bunch of rust out of the old one. I had just put that one in back in November. But, I think my issue was actually my gas cap. I went to add fuel and when I removed the cap, the tank released a lot of pressure.
  5. M

    What to look at, for fixing lopey idle and running rich?

    Fuel pressure was good. Replaced the fuel filter and dumpeda bunch of rust out of the old one. I had just put that one in back in November. But, I think my issue was actually my gas cap. I went to add fuel and when I removed the cap, the tank released a lot of pressure.
  6. M

    Lets see some dropped C1500s

    This old farm truck has come a long way.
  7. M

    What to look at, for fixing lopey idle and running rich?

    I just started having a simalar issue. Starts and run fine. I can drive 75 on the interstate. But someimes on excelleration it stalls and goes. I did AC work on it this past weekend so maybe i messed something up with the vacuum. It does this with or without AC turned on. I am worried it...
  8. M

    94 GMC 350TBI stall

    I just started having this issue. I put a new pump in the first week of November. I only replaced it because the sender didn't work. Now that it is working, the guage only works from full to about half a tank but that is better than nothing. The new pump is much louder than the old pump. I...
  9. M

    A/C replacement parts?!

    I think I am good now. That must have been the incorrect o-ring. I put a fatter one on and it is holding. It is 65 degrees and I am holding a 25 and 150-170 operating reading. I put about 30-31 oz. in. The compressor does still cycle off after about 90 seconds and then re-engages in about 30...
  10. M

    A/C replacement parts?!

    I replaced this o-ring. Maybe it is the wrong one. It was the same as the black one I removed.
  11. M

    A/C replacement parts?!

    Everything was going great until the bottom fitting to the condensor sprung a leak.
  12. M

    A/C replacement parts?!

    Thanks everyone. I have everything replaced and held vacuum overnight. Adding freon now.
  13. M

    A/C replacement parts?!

    If my system is holding freon, do I need to replace everything or can I just replace the compressor and the o-rings?
  14. M

    The Stupid Lowered Questions Thread

    Just a personal thought. I would go to a stock spring and keep the lowering spindles on it. Of course that depends on the shocks you have.
  15. M

    A/C replacement parts?!

    Roger that. Thank you.
See more

Latest posts

Members online

Total: 1,022 (members: 10, guests: 1,012)

Forum statistics

Threads
64,550
Messages
1,396,383
Members
51,978
Latest member
josebrnstrs

Share this page

Top