Recent content by k15 5.7l

  1. K

    Black Bear Tune Issue!!

    Yeah that's what I think happened as well. something was put in wrong.
  2. K

    Black Bear Tune Issue!!

    The trucks transmission is completely factory, and it shifts perfectly under part throttle and normal crusing. Although at about 75 percent I believe it will continue to increase in rpm as well. And I prolly chickened out around 5800 rpm.. and I felt bad taking it that damn high. Thanks Greg
  3. K

    Black Bear Tune Issue!!

    My black bear traditional tune for my 1996 k1500 5.7l just came in. Very happy with the way it performs and the changes made. But im having a issue... After I put the pcm in, whenever I get on the truck it will continue to climb in the rpm's even above 5500 rpm.. there is no rev limiter and it...
  4. K

    6" RCX Lift Install Brake Line Question

    When reading through the RCX instructions they say to remove the hard brake line from the rubber in order to reroute them to their new mount. Is there anyway to avoid removing the two lines from one another? I would just imagine they are going to a pain and will more than likely twist the hard...
  5. K

    5.3 or ls1 in a 1996 k1500?

    Has anybody done this? If so was it all that difficult and what was the overall price to complete the install? Thanks Greg
  6. K

    What bolts to use with longtube headers?

    Btw ended up using arp bolts with 3/8 head and .75in long. worked perfect. was able to use all the same bolts also. Greg
  7. K

    What bolts to use with longtube headers?

    Hey, I recently installed long tube headers on my 1996 k1500 5.7. The problem Im having is that the bolts are hard to get tight due to the holes being so close to the primary tubes. I am using both allen wrench head bolts and standard head bolts. Any ideas on what to do? THanks, Greg
  8. K

    cant get 2-4 servo cover off!!!

    well after spraying the thing with pb blaster and putting the clip back in an just driving it for a few days, I tried it again yesterday and as soon as I removed the clip it popped back a little just like in the video. Thanks a lot for the help guys!!! Greg
  9. K

    how to hang true duals after headers??

    i want to do the universals from the parts stores just need advice on where to hang them at on the vehicle
  10. K

    cant get 2-4 servo cover off!!!

    ok i am going to try these things this weekend. Was trying all weekend to wiggle it with pliers and no luck so i just put the clip back in and am now taking it to school and work. I cannot hammer it in to far can I? Thanks Greg
  11. K

    Dual exhaust using stock pipes?

    I just did hedman long tubes to my 1996 k1500 5.7l, And i ordered an x pipe for it and couldnt find a way to get it to fit. it is because of the t-case and all being in the way, I tried to install it right under the transmission snout but couldnt get away with it due to it hitting the drivehaft...
  12. K

    how to hang true duals after headers??

    anyone?
  13. K

    how to hang true duals after headers??

    Hey, I just installed long tubes with true duals. My only question now is if there is a cheap way to hang the exhaust. I looked at the universal hangers at advance but do not know how I would be able to make it work. Any ideas? Thanks Greg
  14. K

    cant get 2-4 servo cover off!!!

    but shouldn't I be able to get enough play out of it to see the o ring? I can t even see it right now.
  15. K

    cant get 2-4 servo cover off!!!

    any information?
See more

Latest posts

Members online

... and 14 more.
Total: 1,826 (members: 64, guests: 1,762)

Forum statistics

Threads
64,703
Messages
1,399,026
Members
52,262
Latest member
tyler_b

Share this page

Top