Recent content by dwragon

  1. dwragon

    need a vin for computer cloning, please help, 96 7.4 5spd 373

    Found a vin online and had it checked for the 373, out of a 2500, but that doesn’t matter as long as the drivetrain is the same, the vin is 1gtgk29j4te553774, for others who need it.
  2. dwragon

    96 k1500 sitting for half a decade, need recommendations

    If the fuel tank is gummed up, you can clean it out with lye
  3. dwragon

    need a vin for computer cloning, please help, 96 7.4 5spd 373

    Well, it’s for more than one truck, I have two others that I want to convert from autosplatics to 5 speed, want to stay stock, and the 1996 vortec 7.4, 5 speed, and 373 is the setup I want to go with, I just haven’t found a truck with that combo, so I need a vin to get an ecm cloned.
  4. dwragon

    need a vin for computer cloning, please help, 96 7.4 5spd 373

    Yes, it’s a 3500hd, if the gears are too tall, I simply don’t have to put it in 5th, (maybe at 75 mph) and at the moment, with the 513’s, I can take off in 2 no problem. Lots of 4 door dually’s weigh the same, and they have 737 gears. I have a spare rearend, I can always swap it back.
  5. dwragon

    need a vin for computer cloning, please help, 96 7.4 5spd 373

    Hi all, I need a vin for a stock computer cloning for a 96 7.4 5spd with 373 gears, my truck, an NV4500 has the 513's in it and I simply dont need them (7 mpg is also killing me.), but I love all of the rest of the heavy duty suspension. I have a set of 373 posi gears to put in it, and have...
  6. dwragon

    Porportioning valve tools

    Here are two porportioning valve tools you can easily make, the first is from a tape measure belt clip, the second is made from a body clip and a throttle body screw. To purchase these tools cost a total of over $75.00. I recommend these tools over the screw in types promoted by google because...
  7. dwragon

    NV4500 pto numbers

    got some more numbers, more correct ones, as follows, CURRENT Chelsea series 352, (352*SFB case Assembly arrangement 3, (pass side)) 352XSFBXY3XD CABLE, 1063 GEAR for RPO code MT8 91 - 2/94 352XSFBXY3XD LEVER, 1063 GEAR for RPO code MT8 91 - 2/94 352XSFCXW3XD CABLE, 1064 GEAR...
  8. dwragon

    NV4500 pto numbers

    Muncie Reversible RG RL 83 PTO Series Muncie RG6DN7913C1BX C=cable, same as Chelsea 352XS FC XW3XD/ Muncie RG6DN7913L1BX L=lever/ same as Chelsea 352XS FC XY3XD/ C Note Input Gear Part No. 5-P-1064 RPO code MT8 91 - 2/94 (May be 5-P-10645) C Note Input Gear Part No. 5-P-1063 RPO code Mw3 after...
  9. dwragon

    NV4500 ID? early 6:34 external gear

    I understand the difference between the 94 and 96 (the integrated slave cylinder/release bearing design), what I am looking for is a 100% way to identify a 6.34 1st gear case. It may be the the 92-94 6.34 1st gear case has a crossweb above the drivers side PTO plate, as shown in this pic...
  10. dwragon

    NV4500 ID? early 6:34 external gear

    I wish my trucks had that large hole, makes me determined to check next time I work on anything to do with the NV4500, working the trans up with only the shifter hole is a PITA.
  11. dwragon

    NV4500 ID? early 6:34 external gear

    Ok, so from what I have seen the 92-96 NV4500 is identifiable from the 97-2007 by two physical external characteristics, the 92-96 has a crossweb above the drivers side PTO plate, and a thicker/wider reverse bulge. So, how does one tell the difference between an early 6:34 geared transmission...
  12. dwragon

    NV4500 pto numbers

    here is what I have got so far. 1. Muncie does not make the forward/reverse PTO I need. 2 Chelsea, (Parker/ Chelsea Dana352 series PTO 352XSFCXW3XD/ 352XSFCX-W3XD for NV-4500, NV-4500HD (5.61 Low) (Chevy build date 2-17-94 & Later*) but its $1000.00, plus the adapter...
  13. dwragon

    Little white switch on the ignition switch

    Ahh, ok, so if it has nothing to do with security, (being the key-in-ignition switch which would operate the chime) a person could just snip the wires and ignore it. I will try that and post the results. I so much miss my old 64 C10 death trap, it was so simpler....
  14. dwragon

    NV4500 pto numbers

    Yes, a mechanical is what I am looking for. I have a Holmes wrecker bed with a gear drive Tulsa winch that I want to put on a truck that has an NV4500, so I need the numbers for an NV4500 mechanical PTO.
  15. dwragon

    to all, manual transmission input shaft tip eaten by roller bearing fix

    Neat, never knew that existed, I will keep it in mind, but knowing my luck I would buy it, put it in a safe place, and whoever cleans out all my crap when I die would not know what it was and throw it in the trash. :whoknows:
See more

Latest posts

Members online

... and 10 more.
Total: 1,598 (members: 60, guests: 1,538)

Forum statistics

Threads
64,709
Messages
1,399,284
Members
52,287
Latest member
Braxton hager

Share this page

Top