I scored a 454ss cluster off craigslist about 2 months ago for $50 and was wondering if its possible to make a gauge face for it? or go somewhere to have a custom one made? I cant find any for a 110 speedometer anywhere and thought it would be cool to kind of update it a little bit.
If I...
Im going to be building a sub box that fits 2 twelves and is forward firing over the next couple weeks or so for a woods class, the worst part is getting all the dimensions and angles right. Ive probably spent about 10-12 hours alone in just taking measurements and drawing scale plans for it...
thank you for the great amount of help, i'll remember to brace it good and try to figure out the angles needed to get 14+ inches of mounting height/angle and enough mounting depth at the same time. thanks for the help.
Thanks for your help, i know for sure that im wanting to do a sealed box because i think it would be a little bit more simple for me.
I know the 12 inch sub would not fit standing vertically so im going to be building out in front of the seat a little bit to create an angle and have a little...
About a month or so ago I had a 12 inch sub and a 10 inch sub chilling on my back seat taking up space and the 10 inch just stopped pumping so now im starting in on building a pretty much full sub woofer build (building a forward firing sub box from scratch, running larger gauged wire to amp...
I tried manually shifting it and it still wouldn't work out for me, it would still be in first. im thinking it possibly is the shift solenoid, and while I have the pan off is there anything else you guys would recommend replacing or upgrading? and im trying to keep from putting large amounts of...
Okay, so my 93 is giving me troubles again, it will not shift out of first. but all the gauges read fine and had it on the computer and no codes came up and showed the computer was sending the commands to the transmission for second and third but would never shift. I have no clue if it shifts...
I did this to my 93 Chevy, i got a 88-93 GMC grill and got a Chevy emblem off a new chevy and drilled two holes and popped it right in.
I didnt cut out the back plating on the old GMC though so it looks like a big C behind it. but the grill set up looked horrible before I made the...
I think an actual cowl hood would look pretty sweet, but i think the bolt on you have doesn't quite fit your truck because it looks a little bit hard, where as an actual cowl hood would be smoother, matching the rest of your truck. in my opinion a two inch cowl with the vertical sides painted...
Okay, so heres the deal: im wiring lights into by tool box (black plastic) and I got all the wires ran and hooked up to the lights, but they are not working. im wanting to run two clearance lights on each side of the tool box that also double as turn signals, and five red lights on the rear of...
motion passed. im going to be fixing the rust for one of my metals classes at school. im not to worried about the bed though cause im going to be putting a stepside on it later and all patched bedsides ive seen have always came out pretty poor looking unless you do an entire bed side. but before...