Recent content by cagee2000

  1. C

    Reverse Level 1996 GMC sierra INFO NEEDED

    Kicking around the idea of getting 2in drop shackles for my 1996 GMC sierra Z71. My idea is to drop the rear a hair then turn up the keys to be level NO SQUAT. I'm thinking that if I do it this way it will be cheaper, I wont sacrifice as much ride quality and wont have as much stress on the...
  2. C

    1996 GMC 1500 5.7 Vortec 02 sensor code po153

    fuel trims were just fine no misfire counts. As of now it ended up being a frayed wire, I hope the light has stayed off for a while now.
  3. C

    1996 GMC 1500 5.7 Vortec 02 sensor code po153

    The light has been off for some time now. Check wiring my blue wire had a fray apparently the wiring harness dropped down and touched the exhaust. There was 2 wires that were frayed a black wire and a blue correct me if I'm wrong but the blue is signal I think.
  4. C

    1996 GMC 1500 5.7 Vortec 02 sensor code po153

    I'm sure of no exhaust leaks on Bank2. I will check into the fuel trims and misfire counts. I will follow up with results. Thank you!
  5. C

    1996 GMC 1500 5.7 Vortec 02 sensor code po153

    PO153-HO2S Slow Response Bank 2 Sensor 1
  6. C

    1996 GMC 1500 5.7 Vortec 02 sensor code po153

    Has anyone ran into the po153 code before? This is on bank 2 sensor 1. I replaced the OEM o2 with a Bosch everything seemed to be fine for a while then I started getting a po153 code. so I figured that maybe it went bad and also a lot of people say not to use a Bosch o2 sensor. I replaced the...
  7. C

    Need help 1996 gmc 1500 5.7 4l60e 4wd trans slipping in park and grinding when manually put in first

    Update: the linkage inside the transmission was adjusted wrong when i went to put it in gear it bent the rod explaining why the park and 1st wasnt there. now on to a weird miss fire issue.
  8. C

    Need help 1996 gmc 1500 5.7 4l60e 4wd trans slipping in park and grinding when manually put in first

    Yes I have he’s gonna look at it and see
  9. C

    Need help 1996 gmc 1500 5.7 4l60e 4wd trans slipping in park and grinding when manually put in first

    I’m taking the truck back to the trans guy will update everyone on the issue
  10. C

    Need help 1996 gmc 1500 5.7 4l60e 4wd trans slipping in park and grinding when manually put in first

    Yea it shouldn’t be grinding another weird part is if you select 1st with your hand it won’t click in like other gears it springs back into 2nd Thanks for the help
  11. C

    Need help 1996 gmc 1500 5.7 4l60e 4wd trans slipping in park and grinding when manually put in first

    Let me start off by saying the trans was just rebuilt. Due to a bad torque converter the lockup clutch failed.so I decided to have the trans rebuilt while I had it out . Now when the trans is in the park gear is popping or clicking as the truck moves forward while in park.When you try to put it...
    • cagee2000
    • Thread
    • 4l60e grinding park slip rebuilt transmissions
    • Replies: 9
    • Forum: Transmissions
See more

Latest posts

Staff online

Members online

... and 9 more.
Total: 1,656 (members: 59, guests: 1,597)

Forum statistics

Threads
64,556
Messages
1,396,517
Members
51,992
Latest member
Tacticalmonk

Share this page

Top