I’ve got an 88 long bed here. I am messing with the ride height with the goal of getting it more level and less of a high end ass. I put the mccaulugh 2”drop spindles and cut 1/2” off the stock springs up front. And put new shackles and hangers in the back. In true ADD style I didn’t measure...
I have an 88 c1500 2wd with an extended bed. I’m rebuilding the transmission and having trouble sourcing the rear shaft seal and bearing. I bought a rebuild kit and the seal and bearing are too large. Bought individual seal and bearing twice and both are too wide. It’s the extended tail...
There is a vacuum line from the side of the trans to the intake manifold behind the TB. I will post a picture of the pan to double check what I’m working with. But the little rubber connector that plugs into the intake was half way off. After plugging it back in I was able to get a downshift...
There is a place for the cable, just no cable…before I removed the cables I had a passing gear. I was thinking it just needed an adjustment after install and no adjustment points to be had
Looking for some guidance. I have a 1988 c1500 305 auto. I finished some upgrades to the TBI (new injectors and a spacer). I took it for a test drive and can notice some gains, but when I floor it the trans doesn’t downshift into a passing gear. I figured I needed to adjust the TV cable and...