Recent content by BigCountry434

  1. B

    Clutch bleeder screw!!!!

    I got it figured out guys!!!! So the tra Got it running turns out transfer case wasn’t in neutral!! It was still in 2wd. So now my ? Is how do I wire up the 4x4 I’m going from 3 wire to 2 wire.
  2. B

    Clutch bleeder screw!!!!

    No problem. Buuut I’m still having the same issues, I’ll start the truck put it in first gear nothing, try reverse it’ll do I little scraping but still won’t move I dropped the transmission today put a new clutch kit in it with throw out bearing, it’s got a new slave cylinder in it. Could this...
  3. B

    Clutch bleeder screw!!!!

    I’m thinking it’s the clutch pressure plate. I’ve got good clutch pedal when pushed. The guy that was supposed to put a new clutch in it didn’t (best friends for years stole the new kit) and put the old one back in.‍♂️‍♂️‍♂️
  4. B

    Clutch bleeder screw!!!!

    Will try this tomorrow and let you know the results!!!
  5. B

    Clutch bleeder screw!!!!

    Preciate the advice guys. I found the bleeder screw. Now my problem is when I put the truck in first gear and let off the clutch trucks not moving. After bleeding the system earlier this morning “before work” as I pressed the clutch pedal down I couldn’t really feel any pressure on the pressure...
  6. B

    Clutch bleeder screw!!!!

    So I just done a five speed swap in my 95 GMC sierra K 1500 and my question is, how do I believe the slave cylinder? I don’t see a bleeder screw and the only screw I do see is an Allen head screw. Could that possibly be it?? Any and all help is appreciated.
  7. B

    Auto to Manual PCM

    I know this is old but worth a shot my neutral safety switch doesn’t have two purple wires. Just one.
  8. B

    95 GMC Sierra k1500 sle

    I take that back just went and checked radiator level and it’s dropped just where you can see the coils.
  9. B

    95 GMC Sierra k1500 sle

    Will also give that a shot.
  10. B

    95 GMC Sierra k1500 sle

    It was dropping at first, but that was also after I done the flush on it after getting all the air out of the system it wouldn’t drop. I’m thinking hair line crack some where because it’s also dumping coolant back into the reservoir instead of going in the radiator.
  11. B

    95 GMC Sierra k1500 sle

    @Schurkey sorry for late response work has been busy as hell. But I’ve done all of what you said checked over everything now I’m getting heat hot heat as long as I’m setting but no soon as I take it up the road or drive it to work I the heat cools down. Temperature hand will go to 210 and come...
  12. B

    95 GMC Sierra k1500 sle

    Thanks! I’ll look into it and see what happens. Will be in touch with findings.
  13. B

    95 GMC Sierra k1500 sle

    Thanks for the quick response. Yeah I am. I’ve replace water pump blend door actuators heater core thermostat. Pretty much when I leave the hose hooked to the water pump I can’t see any circulation in the radiator but if I hooked it to the radiator I can see it flowing from the heater core as...
  14. B

    95 GMC Sierra k1500 sle

    I know this might be a bit weird and crazy, but can someone point me in the right direction. I’m trying to figure out which heater core hose go where preferably the outlet hose when I got the truck it was running to the water pump and not the radiator so I’m curious if running it to the water...
See more

Latest posts

Staff online

Members online

... and 13 more.
Total: 1,847 (members: 63, guests: 1,784)

Forum statistics

Threads
64,659
Messages
1,398,124
Members
52,161
Latest member
Shelby04

Share this page

Top