Recent content by 99COOP
-
P1870
No problem. I believe when Hodges is referring to $200 that is the reamer cost as well, which will definitely get ya on cost (I've seen them on sites from $80-130) considering you will only use it once so its an expensive one time use. However if you can find a shop that rebuilds GM...- 99COOP
- Post #20
- Forum: Transmissions
-
P1870
it is the TCC valve, and the cause is usually from a worn regulator sleeve and or a worn valve body bore. When installing a new one I would suggest replacing it with a new TCC regulator valve and sleeve but this also requires a reamer to drill out the existing valve bore...- 99COOP
- Post #16
- Forum: Transmissions
-
FSC transfer!
awesome truck, glad you did the body work to get it back to where it sits now.- 99COOP
- Post #5
- Forum: Member Trucks
-
new to here but not to gm trucks
good looking truck, must have a pretty high payload as well considering your hauling a pontoon boat in the bed j/k.- 99COOP
- Post #12
- Forum: Member Trucks
-
P1870
you will get mixed reviews, but for the most part it reduces wear on the clutches, reduces the slip to create a firmer shift which prolongs transmission life, and reduces temps. But a lot of shift kits are just a whole bunch of springs, valves and BS. If your building up your valve body for a...- 99COOP
- Post #13
- Forum: Transmissions
-
-
-
-
Teh Hoe
good to hear, looks like the true trac will be going into my 14 sf swap this winter.- 99COOP
- Post #7
- Forum: Member Trucks
-
Teh Hoe
nice, should be sick with the sas. did the trutrac fail, or 10 bolt housing/axle shafts ?- 99COOP
- Post #3
- Forum: Member Trucks
-
thArf (mike) I need a video to go with this picture!
probably assisted in the demise of the 10 bolt, lol.- 99COOP
- Post #11
- Forum: Member Trucks
-
-
my 99' lifted Tahoe
thanks, Sanded the chrome as best i could, which is a pain in the ass. But the idea is not to remove the chrome cause you wont by sanding, it was just to scratch the surface up, then use a self etching primer (2 light coats) followed with light 600 grit sanding and then 2-3 coats of color and...- 99COOP
- Post #26
- Forum: Member Trucks
-
GMT400 Lift Guide
^ thats what i was wondering cause they seem to be close to the bottom of the fender and i thought thats alot of lift for them to be 37's.- 99COOP
- Post #25
- Forum: Stock Suspension + Bolt On Kits
-
my 99' lifted Tahoe
Love em, i go through tires every year (cause i always end up goin bigger) and would buy these again if i can find the size i want. hahaha, thanks- 99COOP
- Post #23
- Forum: Member Trucks
