Recent content by 98-Z71

  1. 9

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Thanks for the input guys. I just got a tuned PCM from Black Bear and changed my mind midway through the process and decided I wanted the sport mode so I wasn't 100% sure if the tow/haul had wound up being activated. But, grounding it a little longer (half to full second) did the trick.
  2. 9

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Dumb question...I haven't got a switch set up yet to ground the pin for the Tow/Haul, until then I just have to ground an underhood wire to initiate. I didn't have a lot of time to mess with it today but I couldn't get it to activate. Just how long is a "momentary" ground? I was trying to...
  3. 9

    4 Hi Headlight Mod

    Okay, so instead of running the power from the battery to the relay I can tap into a 12 volt auxiliary post in the fuse box that's only hot with the ignition on and run power from there right? What amp fuse and wire should I be using for the power? Something thicker than the 16 gauge? Just not...
  4. 9

    GMT400 You can't quit looking at!

    33x12.50x18 Toyo m/t's on 18x9 Moto metal 954's. it's got 2" blocks and keys and they cleared perfectly. I'm gonna give it a couple more weeks and buy a set of 33x12.50x20 kumho mt's on 20x9 ballistic jesters and let y'all know how it turns out
  5. 9

    GMT400 You can't quit looking at!

    This was mine in high school. I took the wheels and tires off, sold it to a buddy, and just recently bought it back. Bout to start spending money on it again tho lol
  6. 9

    Driveability of Stall and Transgo + Vette Servo?

    Also, is there a specific s10 converter I'm looking for?
  7. 9

    Driveability of Stall and Transgo + Vette Servo?

    Sorry I meant half throttle shifts not 1st-2nd ha
  8. 9

    Driveability of Stall and Transgo + Vette Servo?

    How was the 1/2 throttle, just cruising around town, shifts with it?
  9. 9

    Driveability of Stall and Transgo + Vette Servo?

    I've actually got the Vette servo installed but haven't had a chance to test it cause it wasn't what was causing problems like I thought it was. So we'll see. But I hear alot of good things about the s10 stall and have really been considering that.
  10. 9

    Driveability of Stall and Transgo + Vette Servo?

    Thank ya! I'm really lookin forward to it, I've been reading and lurking around on here for weeks now since I got my first, OBS back. I know this has been discussed several times here and elsewhere just with different applications and viewpoints. Figured I'd see what suggestions for my setup...
  11. 9

    Driveability of Stall and Transgo + Vette Servo?

    Alright guys I've been reading around a lot. I have a stock 5.7 with 33's and 20's on the way and its time for the 4l60e to be reworked. I personally think for daily driving and some fooling around/burnouts etc. that a higher stall around 2k-2400 would be pretty ideal for me cause I really do...
See more

Latest posts

Members online

... and 8 more.
Total: 1,483 (members: 58, guests: 1,425)

Forum statistics

Threads
64,760
Messages
1,400,063
Members
52,383
Latest member
hogosmith

Share this page

Top