Recent content by 97zSC

  1. 97zSC

    vortec hesitation when first going into gear

    1997 k1500 Rebuilt 3rd and 4th gear as well as all the solenoids in the 4l60e about two years ago, after that it ran and drove fine until the head gaskets blew then it sat for about a year and a half. Just recently finished putting new heads and head gaskets on and it doesn't really want to...
  2. 97zSC

    Need help identifying connector

    Putting my top end back together and stumbled across this connector. No clue what it goes to but it runs back to the crank position sensor. Anyone know where it goes? http://imgur.com/fxESkH9 http://imgur.com/PLjfF5l
  3. 97zSC

    Missing stud

    I believe that's what it is but will I be okay just putting everything together and running it until I can get the stud back Monday? I didn't know if it blocked off any water jackets or anything
  4. 97zSC

    Missing stud

    It was just a stud on the front of the passenger side head, I thought there was only one?
  5. 97zSC

    Missing stud

    1997 5.7L Vortec. Long story short, my heads are in the shop with a stud in the passenger side head, everything else I stripped off before taking them. I got my rebuilt heads today so would it still be possible to put it all back together and run it without that stud or do I have to wait until...
  6. 97zSC

    Rebuilding 350 vortec, what all should I do?

    I have looked into a BB tune but at the same time I kinda want to learn on a software like EFILive or HPTunes, so I'm not too sure on that one lol. The machine shop is supposed magnaflux the head before doing my valve job and everything so hopefully they checked out. I cleaned them up a little...
  7. 97zSC

    Rebuilding 350 vortec, what all should I do?

    Yeah I plan on doing this build fairly stock just to have the experience under my belt and to say I've done it then I want to get another block and just build it as bad as I can. Also I do plan on doing the 0411 PCM swap and buying a tuning software although I'm not sure if I want to feel the...
  8. 97zSC

    Rebuilding 350 vortec, what all should I do?

    This is a pretty long winded post however I just want to cover all my bases, if you don't feel like reading just skip to the bottom. But let me go ahead and preface this by saying I'm 19 years old and have no mechanic background aside from a water pump and front caliper replacement on a 96 Ford...
  9. 97zSC

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Will do! Thank you
  10. 97zSC

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Well I see lextech hasn't been around for a while but there's a few guys keeping it going, so here's in hopes that someone sees his. I have a 97 k1500 5.7 4l60e 4wd if anyone can provide the pinout.
See more

Latest posts

Members online

... and 11 more.
Total: 1,773 (members: 61, guests: 1,712)

Forum statistics

Threads
64,500
Messages
1,395,327
Members
51,835
Latest member
swat bourbon

Share this page

Top