95 Tahoe's latest activity
-
9Can the Kelsey Hayes ABS module be bled on a 95 truck if the pump is stuck? I know about the little port on the side.
-
995 Tahoe replied to the thread Fast Braking seems sluggish.I found the code on the glove box it is JB5.
-
995 Tahoe replied to the thread Fast Braking seems sluggish.The rear end is 10". A lot of what you mentioned I have scanned through but do not completely understand it. I have no idea what...
-
9Fast braking in my 95 Tahoe seems sluggish. Brakes always felt fine when braking normally except a lot of pedal travel. I replaced the...
-
995 Tahoe replied to the thread Has anyone used a Holley 2 Barrel on TBI adapter plate.The ignition clamp for my scope came in. It confirms a lean miss.
-
995 Tahoe replied to the thread Has anyone used a Holley 2 Barrel on TBI adapter plate.This was going to be part of the carb swap. Never though about just dropping an HEI in and see how it runs. I know I still need the...
-
995 Tahoe replied to the thread Has anyone used a Holley 2 Barrel on TBI adapter plate.It was installed new with the rebuild. Only about 4000 miles on it.
-
995 Tahoe replied to the thread Has anyone used a Holley 2 Barrel on TBI adapter plate.I've been fighting the same issue on the truck for about a year now. It's just a toy vehicle not a daily driver. It has a rough idle...
-
-
995 Tahoe posted the thread Has anyone used a Holley 2 Barrel on TBI adapter plate in LSX + Carb Swaps.Has Anyone ever put a Holley 2 barrel on a TBI adapter plate. I understand most everything involved with getting the transmission to...
-
995 Tahoe replied to the thread Timing randomly drops 4-8 degrees.I put a pin in the back of the coil on the 12+ in. I attached my scope to it and ran it for about 10 minutes. I never saw a drop in...
-
995 Tahoe replied to the thread Timing randomly drops 4-8 degrees.I appreciate the thoughts and the diagrams. My scope only has 1 channel. However, I can I will tie into coil power wire and see if I...
-
995 Tahoe replied to the thread 91 GMT400 kicking my rear!.You can download tunerpro and use an adapter cable for the OBD1. That's what I do. You can look at the sensor output for the ECT...
-
995 Tahoe replied to the thread Timing randomly drops 4-8 degrees.I plugged my oscilloscope into the reference wire and it confirms the pulse dropping out as the ECM shows. I pulled the distributor and...
-
995 Tahoe reacted to Erik the Awful's post in the thread Timing randomly drops 4-8 degrees with
Like.
My inner nerd is singing. Nice work. -
995 Tahoe posted the thread ECM does not see reference pulse consistently. in Engine Performance + Maintenance.I've been fighting this random miss for a while on a 95 TBI engine. I think I'm finally on the right track. The reference pulse is not...
-
Staff online
-
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.
Members online
- Orpedcrow
- Remodelmaster
- Howard1320
- arrg
- paulobs
- the_elegant_fox
- 0xDEADBEEF
- docstoy
- 95 Tahoe
- Supercharged111
- someotherguy
- kennythewelder
- 99xcss4
- KMFA0214
- scott2093
- caw_86
- Drunkcanuk
- gswbbc
- Murphdawg19
- Fwbarre
- Noobular
- Keeper
- TStowell
- Caman96
- BonestockK1500
- Peavey
- 454C2500Longbed
- fancyTBI
- Pbeanbag
- L31MaxExpress
- Augymeister
- 92SlammedC1500
- joef3
- packer0440
- Zeke1969
- Scooterwrench
- rockien
- rwtown81
- BigReb95
- VIKING_MECHANIC
- broyea1341
- 95burban
- KFarmer81
- MikaelT
- PolarBear
- slow_c1500
- RaceRod
- DerekTheGreat
- roaming_art
- Erik the Awful