rags77
I'm Awesome
Pressure wash and see where ithe source is
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It is big leak. It leaks maybe a quart of oil in twenty min. The thing is that my actual oil is really clean and the trans fluid is clear so I don't know why this stuff is black
Also I took the intake off and got rid of some liquid gasket in the back between the block and the intake
Unless you put a new rubber seal there, instead of rtv gasket sealant, you have now forced yourself to remove the intake again and put that seal back.. that deal has to be there or you will leak out more oil then the Valdeze.
Sent from my SAMSUNG-SM-G891A using Tapatalk
Point is, he "removed" "liquid gasket" but doesn't say anything about what he replaced it with--if he replaced it at all.The rubber seal has not been used on the intake manifold for over 30 years as per GM. RTV is the proper way to seal the front and rear of the intake manifold.
Point is, he "removed" "liquid gasket" but doesn't say anything about what he replaced it with--if he replaced it at all.
Most folks I know would rather use The Right Stuff by Permatex (Urethane) than RTV Silicone.
Even with no seal at all back there, I wouldn't expect a quart in twenty minutes. That sounds like an oil pressure switch or sending unit.