Hey Guys, I need some advice. I have a `91 350 TBI with a leaky power steering pump. I was going to pull it and rebuild it but since I am cheap and lazy and have access to a pull-a-part yard I thought I would just buy one there since I can get it for about the price of a rebuild kit. I thought I might mess mine up anyway so I thought getting another one would be a good idea. Well I found a good one and I got a Performance Tools puller and the puller worked like a charm and the pump came right off of the `94 at the junk yard. The problem came when I got home and tried to pull my pulley off, it won`t budge. The puller was starting to go sideways and starting to take the outer lip off of the pulley. I stopped before I completly f*ck&d it up. My question is this, what is the best plan "B". I have a torch and can heat the pulley behind the lip, or I can use my Sawsall to cut down into the pulley. Since I have a good pump and pulley I don`t mind destroying my old one. I just don`t want to beat on my truck or use a cutting torch on my engine. If anyone ran into this before and has advice I would be glad to hear it. Thanks.