egr vac. solenoid hose routing?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Swims350

I'm Awesome
Joined
Mar 28, 2010
Messages
4,134
Reaction score
44
Location
Logan Co. WV
Ok guys I got an 88 k1500 with a 350 tbi and I was wondering if someone knows which port goes to the egr on the egr solenoid and what the other port goes to?

I tried to keep track of it when i rebuilt the motor but I wanted to make sure. I did have it tied into the bottom port on the solenoid and the top I had plugged off, the front single port went to the tbi front ps and had 2 lines in the elbow, one went to the air pump I think.

I don't have a diagram for it either.
 

Swims350

I'm Awesome
Joined
Mar 28, 2010
Messages
4,134
Reaction score
44
Location
Logan Co. WV
ok from what I was told it's only got 2 vac. lines, the 2nd on the back side up top is a vent and should have a sponge filter on it. So I gotta unhook the vac. plug I had on it and put a filter on it and hook the egr back to it as it was before.
 
Top