I have 2 sets of original GM rubber mounts.Ahh, well that explains the surface rust pictured on the frame mount too then. What did you buy for mounts?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I have 2 sets of original GM rubber mounts.Ahh, well that explains the surface rust pictured on the frame mount too then. What did you buy for mounts?
I have 2 sets of original GM rubber mounts.
Read too many negative reviews on the poly mounts. Just scored a NOS transmission mount for $42.00.
You must be registered for see images attach
It might. The mounts are in the right spot yeah? I’ve had them in the wrong spot before.I forgot to mention yesterday, after removing all 4 mount bolts and loosening 2 core nuts. I’ve got all driver side upper 1/2 of mounts in along with upper core, but when I tried to open driver side door, it’s rubbing against fender. Is this something that gets resolved when all 6 mounts are in and get torqued to spec? I’m really hoping so!
Definitely in right positioning. As you know, there’s no way you could put the rear cab mount in the front of cab. Was a pia just to get the front in while cab was lifted. Core support mounts are different too.It might. The mounts are in the right spot yeah? I’ve had them in the wrong spot before.
Definitely in right positioning. As you know, there’s no way you could put the rear cab mount in the front of cab. Was a pia just to get the front in while cab was lifted. Core support mounts are different too.
Front Cab Mount is GM 15567808Your core support mounts are different than your front cab mounts? I put core support mounts in the front of my 1500's extended cab, they were the same.
I just checked, yours are different too, they should be same as mine.Your core support mounts are different than your front cab mounts? I put core support mounts in the front of my 1500's extended cab, they were the same.