When I installed my 2nd battery set-up, I also did the BiG 3(5) upgrade. I went with what most YouTube videos did. I left the factory positive battery terminal to junction block and positive alternator terminal to junction block in place and then I ran a new upgraded awg run from Battery...
Side question/opinions.... So since I finished up and have everything back together... I still get a little fluctuating occasionally on my temp sensor (less than 100 miles driven total since repair)??! More importantly my alternator has always ran at 14 amps++ steady with stereo, sub, amp...
Good looking out! I'm currently walking the rows of a few boneyards here in Idaho Falls for the upper and lower fan shroud off of the bigger truck before I customize Babygirl and her original parts. Plus I've never perused the yards here before and this kind of a Vaca allows for a few minutes...
If interested....
Skill Level: Intermediate
Experience: Yes done before. 1st time on a truck. Repair done in visitor parking of an apartment complex I do not reside at.
1. Removed the upper fan cover. 3 bolts across the top, above the grill and 4 bolts (2 on each side) connecting the upper...
So like a month ago the upper hose came off while driving, when I removed the hose completely... Like 75% of the attachment on the radiator had broken off and was inside the hose. So 4 super glue and clamp repairs later... Phuck.... Right! I had a few days off so I got my parts, a plan...
I truly hope I see your kind of success with my whole repair and decisions made on parts etc. I'm not a huge fan of wrenching on whips, but I'm a solid wrencher with decent knowledge. Growing up my father repaired and wrenched on semi pro race cars on the weekends and I was expected to be...
Bet! I just went out and filled the overflow bottle since the drive did drain it after letting her sit all day. The radiator was pretty much tip top full. I also did the usual upper hose burp, etc. initially. The top oil cooler line that puked on the 1st start up after the repair required just a...
I see your point. After pondering your point... I would say part of my decision was most likely influenced by the last month of pulling over and waiting for her to cool down so I could fill her up with antifreeze after she had popped a hose again. Yes the pressure was released with said hose...