Nick88's latest activity
-
Nick88 replied to the thread Code 32 with a high flow exhaust..I’m not too worried about more mpg, I just don’t want a SES to cause a drop in it. When going around 60mph in OD with 3.73 and 33s I can... -
Nick88 replied to the thread Code 32 with a high flow exhaust..Do you know if code 32 would cause “limp mode” I don’t mind driving it around for a bit with an on and off SES before I pop the intake...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..Do you think it’s possible even though it obviously won’t be nearly as thorough, I could pop off the egr and spray a ton of carb cleaner...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..My only concern is I have heard when the SES light comes on the TBI trucks go into “limp mode” where it adds way more fuel and retards...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..Anyone?
-
I have a 1988 350 TBI vin K. Little back story, my old ECM was shot and wouldn’t recognize a faulty egr. I found the cheap egr I had was...
-
Nick88 replied to the thread Important Wiring Question.Update! So I noticed yesterday the EGR was not working (It was the last duracrap part on my truck from Autozone so now all that cheap...
-
Nick88 replied to the thread Important Wiring Question.Could it possibly be the ICM 4 prong connector behind distributor? If the connector is worn or corroded would that be able to cause an...
-
Nick88 replied to the thread Important Wiring Question.I set timing to 0 and 2 independently when I replaced the distributor. The timing retarding isnt like a regular retard its very heavy...
-
Nick88 replied to the thread Important Wiring Question.I didnt ignore the help, I just firgured Id try it just in case considering it took me 2 minutes to do and 5 seconds to cut the wire and...
-
Nick88 replied to the thread Important Wiring Question.Alright, so I added a second ground point on the manifold off the esc and now i have code 43... I guess the esc is only supposed to be...
-
Nick88 replied to the thread Important Wiring Question.I just want to get the damn thing fixed, all my ignition parts are brand new it gets frustrating quick, im gonna try to add the second...
-
Nick88 replied to the thread Important Wiring Question.Ive been having an issue where when i start accelerating, the timing retards. So the truck ends up being completely dead basically under...
-
Nick88 replied to the thread Important Wiring Question.Im more concerned if the wire might have any breaks or chaffing inside the harness or hidden, and my opinion is extra grounding could...
-
Nick88 replied to the thread Important Wiring Question.Just out of curiosity, would there be any difference grounding it by tstat housing compared to other area closer to esc? just wondering...
Members online
- Cruise
- Johnniemustang
- Schurkey
- david97z71
- Papikev252
- Rodney87GN
- uberman1001
- Torchred
- Kennyg
- TheRedMamba
- burban454
- Uncle Jeff
- joshuagregory77
- LIT94SS
- MurderYurFace
- Johnayy
- awischerath
- imurjr
- L31MaxExpress
- cdone
- Charlesteneows
- AboveTheLogic
- scott2093
- slow_c1500
- sneakingfart
- offroadtahoe
- thadeathtrap57
- Dariusz Salomon
- Idaho83815
- texasil
- Erik the Awful
- caw_86
- MANIAC
- eloy
- jinks67
- 95RCSB
- 454cid
- Drunkcanuk
- eskie12
- Marc940
- smdk2500
- Timber
- 98sierraSLT
- Jess_russo
- Moofus02
- Harkin
- jus10inbrla
- Daly
- CruiseLifeB
- orange57