Sean Buick 76
I'm Awesome
I swapped a spacer onto my 91 2500 LD and it pulled my TV cable too tight and burned up the transmission.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
When lifting the throttle body you need to lift the bracket that holds all of the cables to it the same amount so that the geometry of motion stays the same.I swapped a spacer onto my 91 2500 LD and it pulled my TV cable too tight and burned up the transmission.
Yeah the 22 year old me had no idea about that and the trans was toasted by that time.When lifting the throttle body you need to lift the bracket that holds all of the cables to it the same amount so that the geometry of motion stays the same.
The more you pull the cable the higher the line pressure rises. If the cable was pulled too tight the worse problem would have been high shift points and no 4th gear. I'm thinking more like too much motor on a tired transmission. 700R4's are not known to handle a lot of torque unless you put some HD parts in them.I swapped a spacer onto my 91 2500 LD and it pulled my TV cable too tight and burned up the transmission.
Either way it was fine once I had the trans rebuilt and it was fit for the rebuild so it’s all good. Thad was 16 years ago lol I had the trans rebuilt while I was getting married.The more you pull the cable the higher the line pressure rises. If the cable was pulled too tight the worse problem would have been high shift points and no 4th gear. I'm thinking more like too much motor on a tired transmission. 700R4's are not known to handle a lot of torque unless you put some HD parts in them.