ccreddell
I'm Awesome
Seems to me that if you used yellow LEDs, when they shined through the green it would look blue. Anyone tried that?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Did you ever find out what's wrong? I'm going to install my white faced gauges to my 94 soon. I hope this doesn't happen to me.So.... in the vein of "what can go wrong,will", I pulled the cluster out again, sanded the back of the display to get true white light shining through rather than the green and swapped the LEDs around. I have full white light across the entire gauge but now only my upper gauges work. Both the speedo and tach are just dead.
Time to get the probe out. Or just go full customSo.... in the vein of "what can go wrong,will", I pulled the cluster out again, sanded the back of the display to get true white light shining through rather than the green and swapped the LEDs around. I have full white light across the entire gauge but now only my upper gauges work. Both the speedo and tach are just dead.
I need the link!! Spent half this evening looking for that exact face for my truck! Thanks in advanceI did this to mine.
Plastidipped the needles. They glow a little at the base, I have a spare set I might clear and see how that looks.
The white face came from eBay. My mother in law got it for me for Christmas, I can get a link if you guys want, it is electroluminescent.
You must be registered for see images attach
You must be registered for see images attach
That's the look I'm going for. How does the Orange and red bits shine thru with (what looks to be) blue leds?Just put some in mine as well.. No clear needles might pick a gauge cluster up when I make my next visit to the wrecker, and try it out before I mess things up.
You must be registered for see images attachYou must be registered for see images attachYou must be registered for see images attachYou must be registered for see images attachYou must be registered for see images attach
I need the link!! Spent half this evening looking for that exact face for my truck! Thanks in advance
Welders can weld, and fitters can fit, but the porta-can-man knows his ****.