Got some more time this week end to work on it. Had the dash in and had to take it back out because I didn't get the fitting for the liquid line on the evap though the firewall. Pulled it again and found I was a dummy and didn't pull it out of the heater box before I put the box to firewall seal in place. Got that corrected and dash back in again. Got the carpet washed one more time to get the dirt and debris out of it from sitting outside. Started putting some of the interior bits back in as well.
Got the carpet and new pad installed.
You must be registered for see images attach
Seats are back in but need some spot cleaning done.
You must be registered for see images attach
Ive washed the back seat 3 times and have nothing but clean water coming out. Check it the next day and have brown crap on the surface again. Gunna try a carpet shampooer and see if it will suck out the remaining brown goo out.
You must be registered for see images attach
Next up is getting the dash back together and replacing one of the PCM plugs I destroyed trying but failing to get a broken pin out of. Will hopefully have the plug Monday or Tuesday. The wire that is broken is a sensor ground and I'm wondering if that might be the cause of the rough intermittent running. Also another thing possible is the 10 year old diesel its been trying to burn. Also need to get the shifter handle and boot put back on. Not looking forward to that. It was a pain getting the screws out and I'm sure going back in wont be any easier. At least this time I won't be smelling nasty stuff.