-
-
yevgenievich replied to the thread Converting L29 to cop like L21 L18.I believe 8.1l valve covers are too short to clear rockers on standard bbc heads. But can use standard valve cover as spacer and weld... -
-
yevgenievich replied to the thread 12200411 PCM swap for 1996 to 2000 GMT400 trucks.Ecm will not distinguish between park/neutral and drive positions. Should still run, but will not pick tables correctly
-
yevgenievich replied to the thread TOTM questions and coments thread.Both wearing their respective stickers, although a bit dirty at the moment. Daily driver lives. Thanks for organizing and to all that...
-
-
yevgenievich replied to the thread New Interior Door Handle Bezels.Simplest is probably just install a nonnfunctional power lock button. Or install a power lock botten and wire it to be required to press...
-
yevgenievich replied to the thread 1997 gmc k2500 burban.Will get better pictures tomorrow, but person hacking at it was trying to bypass passlock. I think best action might be to completely...
-
yevgenievich replied to the thread 1997 gmc k2500 burban.I have been wondering regarding little board that is connected and its function. Or if just getting a new cylinder with key will have it...
-
yevgenievich replied to the thread 1997 gmc k2500 burban.My winch is very underpowered (atv winch). Had to play ratchet strap game. Need to make sense on what is damaged in ignition for...
-
-
yevgenievich replied to the thread 1997 gmc k2500 burban.Helped pull out and tow couple of trucks. Need to try getting 2500 running, but it has been attempted to steal and column is tore up...
-
-
yevgenievich replied to the thread R4 Scroll Compressor Experience.Sanden service guide https://www.gmsquarebody.com/threads/sanden-service-guide.22419/
-
yevgenievich replied to the thread R4 Scroll Compressor Experience.SD7H15HD-FLX worked well on dual system on 91 suburban for me. Parallel flow condenser and elec fan were also added. Held cabin cool in...
-
yevgenievich replied to the thread R4 Scroll Compressor Experience.I did sanden conversion on my 91 square using stock lines. Had an adapter to extend one of them...
-
yevgenievich replied to the thread Calling all Escalade/Denali experts!.This is the radio that is running 6 disk cd changer with a sub and steering wheel controls from cadillac on my 99 tahoe
-
-
yevgenievich replied to the thread Am I underpowered?.I would like to get 8.8 for less than 8.1l. Usually rods and crank are forged on medium duty motors, but rods still used weaker hardware.
-
yevgenievich replied to the thread Backup camera.I have used the following on a couple of vehicles with good success...
-
yevgenievich replied to the thread 4l80E Intermittent No 4th Gear.Often could be a failure of tcc apply circuit or if vss giving bad information. Ecu will see slip with tcc applied and keep increasing...
-
-
Loading…
-
Loading…
Members online
- 99xcss4
- FighterOfTheFoo
- Schurkey
- Wetwoody
- Rickyxxl
- Caman96
- HotWheelsBurban
- alvaroemg
- Blue91
- Nad_Yvalhosert
- docstoy
- smdk2500
- fastcheaporright
- Moofus02
- GrimsterGMC
- Valianze
- 520K2500
- SNCTMPL
- Feral peasant
- TheDogsSuburban94
- scott2093
- BustedCrank
- tayto
- rozzi
- Carlaisle
- Drunkcanuk
- Saren42
- CRZ_GNGE
- Cherryred98
- Erik the Awful
- jm101
- Blackout67
- Aqua-pig
- IndexOf0
- CooterCruncher
- TreyG33
- solaralexx
- yevgenievich
- Obslow
- 4player
- dano9221
- StickySteve88
- Asjr1026
- PM18S4
- TurboMike
- DaltSmith94