Tomcat71's latest activity
-
Tomcat71 replied to the thread Solid brakes now...I know for sure one caliper has been replaced for sure. Soon the other one will be, I dont know if its been replaced or not. This system... -
Tomcat71 replied to the thread Confirmed brake bleeding scan tools.In over 40 years of driving I have NEVER had to engage ABS. mainly because I watch where the hell Im going and not playing with the...
-
Tomcat71 replied to the thread Confirmed brake bleeding scan tools.My control unit was junk and the abs block had a bad solenoid, and I wasnt paying 200 bucks to continue to have **** ass brakes. I...
-
Tomcat71 replied to the thread Confirmed brake bleeding scan tools.Do the delete and be better off.
-
Tomcat71 replied to the thread Distributor problem am lost.When you replace the cap, Make sure to smear dielectric grease on the rubber washer that surrounds that rotor button under the coil.
-
Ill say the same thing. Most use a different connector. The ones that use an OBD 2 are pinned differently than regular.
-
Tomcat71 replied to the thread Putting A Chip In A TBI Truck.1994 caprice would have had an LT1, not a TBI 350, that ended in 93 . and check out these guys if you are interested in tuning and ****...
-
Bilstein and KYB off the shelf shocks are NOT high end. Monroe is short lived bottom feeder garbage and I won't touch them.
-
Tomcat71 replied to the thread Confirmed brake bleeding scan tools.biggest hold up is it going through 2 countries customs process.
-
Tomcat71 replied to the thread Confirmed brake bleeding scan tools.I ordered from...
-
Tomcat71 replied to the thread Confirmed brake bleeding scan tools.you can get a Tech 2 clone for not much more money ... i just used mine on this 91 I picked up , told me the ABS computer was garbage...
-
Seems like a lot for a truck without a retractable under hood light.;)
-
Tomcat71 replied to the thread 1990 C1500 ABS (RWAL) removal..Just bypassed mine and the rears now work great. good firm high pedal also just like it should have been from the factory.
-
Well after getting this truck the Brake light was on due to a bad wheel cyl in the rear, so I bypassed the RWAL and tossed that **** in...
-
So FCS Chinese shocks last longer than Bilstein’s or KYB MonoMax?
Members online
- ZSC-114
- someotherguy
- SoulKamil
- Caman96
- Laredo
- welshman
- Char
- The-Distor
- DDP1
- Nick McCumber
- Erik the Awful
- Sle-z_90
- 98BlackSierra
- Gatlin
- El Tigre
- shablagoo_gabagool
- Road Trip
- Chris19
- kf4zht
- man-a-fre
- Ivang4342
- 0xDEADBEEF
- SAATR
- Jamesrw
- Charlesteneows
- Das Hatt
- PlayingWithTBI
- jus10inbrla
- csohn18
- vince72
- SNCTMPL
- stcroix16
- Fireball5657
- Hardware_Hank
- Av572
- 98 Nitro
- crowfather
- anson1342
- Blockyng
- Alteca
- Jake_Caulley
- 454cid
- lukeapre
- Iluvmyburban
- Pauly1119
- dynsthekid
- TXDevilDog
- pilly
- ESBs88
- Dr13