Recent content by movietvet

  1. movietvet

    14 Bolt Rear Bearing Slop

    https://www.rockauto.com/en/moreinfo.php?pk=5565963&cc=1052558&pt=1664&jsn=1486
  2. movietvet

    Cylinder 1 and 5 misfire

    I would seperate, even if do not need to. Make it all fresh. Who knows what you might find.
  3. movietvet

    14 Bolt Rear Bearing Slop

    In and out play=Good. Spinning noise and up and down play=Bad.
  4. movietvet

    14 Bolt Rear Bearing Slop

    His first video was just a "sound" of end play and he never showed the amount or said the amount. I have seen and heard worse that ended up being fine but, no biggee. I like tighter tolerances, like yourself. The second video showed obvious axle bearing problems.
  5. movietvet

    So Many Options

    https://www.rockauto.com/en/moreinfo.php?pk=108253&cc=1144088&pt=1688&jsn=1417 I looked up as a 5.7 engine and automatic, but I was guessing because like you did not say. I believe these are the u-joints https://www.rockauto.com/en/moreinfo.php?pk=387875&cc=1144088&pt=2392&jsn=1413
  6. movietvet

    14 Bolt Rear Bearing Slop

    He showed the axle bearing slop in the second video and it DOES need axle bearings and seals and axle inspection. I do have to disagree with the 1/16" end play meaning there is a problem. If the end of the axle is beat up and has uneven grooves for the C clip or if the C clip is beat up...
  7. movietvet

    14 Bolt Rear Bearing Slop

    You likely have a lip at the inner edge of the drum. You should have them machined and checked for thickness instead of assuming. Heat transfer will warp the metal over time. You are gonna have new shoes, they should be touching a new drum surface. For what it costs to resurface, you can come...
  8. movietvet

    Paycheck again at 71?

    I had a dog, "Philbert", over 30 years ago that was a mix of an Airedale and a Chow and was almost as ugly. That dog had a thing for cold and cleaned radishes and my beer when I was watching tv.
  9. movietvet

    14 Bolt Rear Bearing Slop

    Do the wheel cylinders and entire hardware and adjusters when you do the rear brakes. When you do the axle bearings, make sure to inspect the surface of axle where the bearing rides. Should be smooth. No scoring, galling, pitting, chunks.....etc. If looks reusable but do not want the bearing on...
  10. movietvet

    Paycheck again at 71?

  11. movietvet

    Paycheck again at 71?

  12. movietvet

    Paycheck again at 71?

  13. movietvet

    Paycheck again at 71?

  14. movietvet

    Stalling at idle

    Welcome to the forum from Oregon. My girl has the same truck and same year. Supply some pics of this mess please. Previous owner replaced cables and problem started? Then you adjusted and no help? What adjustments did you make?
  15. movietvet

    Paycheck again at 71?

See more

Latest posts

Members online

... and 103 more.
Total: 1,805 (members: 153, guests: 1,652)

Forum statistics

Threads
64,994
Messages
1,404,075
Members
52,903
Latest member
thechad231

Share this page

Top