Gordy_'s latest activity

  • Gordy_
    Gordy_ reacted to fancyTBI's post in the thread 350 swap? with Like Like.
    You are right. OP, I can’t help with much of the wiring on that (what’s different, what’s the same) but the hard parts I listed should...
  • Gordy_
    Gordy_ reacted to Drunkcanuk's post in the thread 350 swap? with Like Like.
    He's planning on using a Holley Sniper I believe.
  • Gordy_
    Gordy_ replied to the thread 350 swap?.
    I don't have a 4l60e, I have the getrag 290 5spd. I have plans to rebuild the transmission and engine, but I figured if I'm in there and...
  • Gordy_
    Gordy_ reacted to Drunkcanuk's post in the thread 350 swap? with Like Like.
    As long as you are staying with the same transmission, all good on the driveshaft. You will need new motor mounts as @Moofus02...
  • Gordy_
    Gordy_ reacted to Moofus02's post in the thread 350 swap? with Like Like.
    The 350 will bolt right to your 4.3l transmission. I believe you will need the v8 mounts but I'm not sure
  • Gordy_
    Gordy_ posted the thread 350 swap? in Engine Performance + Maintenance.
    So my truck has the 4.3l efi engine. She's an 89 k1500. Would I be able to bolt in a 350 chevy and sniper efi without dealing with...
  • Gordy_
    Gordy_ replied to the thread '50 Chevy 3100.
    I love baby moons. I was gonna put some on my '63 dodge dart, but I had to sell her since I'm moving
  • Gordy_
    Gordy_ replied to the thread NV3500 input bearing replacement.
    I have 2 bottles of Lucas syncromesh for my transmission as I planned to change the fluid and never got around to it. I am pretty sure I...
  • Gordy_
    Gordy_ reacted to CumminsFever's post in the thread NV3500 input bearing replacement with Like Like.
    You can do it. Research exactly how to replace the bearing, as in, know what all must come apart on the transmission. Make sure you have...
  • Gordy_
    Gordy_ replied to the thread NV3500 input bearing replacement.
    Never done it before. It's the bearing for the transmission input shaft, not the guide bearing. Yes I have a transmission jack. I have...
  • Gordy_
    Gordy_ posted the thread NV3500 input bearing replacement in Transmissions.
    As some of you already know my '89 k1500 has a noisy input shaft bearing, and I have to drive this truck from Oregon to Kentucky in...
  • Gordy_
    Gordy_ replied to the thread Fuel tank strap issues.
    Did you check for a nut on top? If someone else has pulled the strap down and stripped the threads they may have put a bolt with a nut in.
  • Gordy_
    Gordy_ replied to the thread Worst OBS mods.
    A light gray gloss paint job. I hate the look.
  • Gordy_
    Gordy_ replied to the thread Changing to split bench from a '94.
    That's a bit past my budget. What I have works now, but I will keep that in mind.
  • Gordy_
    Gordy_ reacted to GoToGuy's post in the thread Changing to split bench from a '94 with Like Like.
    "seatbelt planet " re webbing your belts. Is one a friend used and was happy with, keeping the original hardware , having new certified...
Show older items

Latest posts

Members online

... and 15 more.
Total: 1,494 (members: 65, guests: 1,429)

Forum statistics

Threads
64,994
Messages
1,404,066
Members
52,900
Latest member
OBS1990

Share this page

Top