Wiring Help!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TrillWill

Newbie
Joined
May 16, 2022
Messages
2
Reaction score
0
Location
Rawlins Wyoming
Hey guys wanted to reach out and see if anyone could help me with shaving my old engine harness. I have a 93’ 1500 that I’m swapping with a 6.0 LQ9 and will be running a holly terminator X. I want to know if there is a way to shave the old SBC harness down to just the BCM wires,( lights,ac, ext.) Thanks in advance!!!
 

GoToGuy

I'm Awesome
Joined
Sep 16, 2020
Messages
2,934
Reaction score
3,409
Location
CAL
Your doing the swap, go through the wiring diagram, eliminate what you don't want or need.
 

TrillWill

Newbie
Joined
May 16, 2022
Messages
2
Reaction score
0
Location
Rawlins Wyoming
Your doing the swap, go through the wiring diagram, eliminate what you don't want or need.
I am doing the swap, and I just wasn’t 100% sure there wasn’t loops that tie into the BCM some how or pulled single from the BCM loom somehow
 
Top