Wiring help - 93 to 97 door panels

[jus10inbrla]

So got everything swapped over.. however im stumped on wiring as the diagram i have is not realy helping color wise or count wise.. see attached pix and help if u can

 

[jus10inbrla]

These are the wiring on my 93; unlock has 5 pins, driver & psgr each have 5 pins.

 

[jus10inbrla]

Driver & psgr 97 controls

 

[jus10inbrla]

Disregard spelling ; was in a hurry at shop

 

[89obsSB]

Disregard spelling ; was in a hurry at shop

So you need wiring diagrams for both 93 and 97 to see which wire does what?

 

[89obsSB]

You must be registered for see images attach

You must be registered for see images attach

 

[89obsSB]

See if this helps out any

 

[jus10inbrla]

That oughta work! Thx.

 

[89obsSB]

That oughta work! Thx.

No problem

 

[jus10inbrla]

This swap
Has whipped my ass. I put the 5 pin back in on driver side (for psgr) and psgr window works correctly from psgr side new switch and original switch on driver side


When i hook up the 3 wires to new switch on master side, only the master switch works. Nothing on psgr side new switch.


What am i missing ?!?