who makes the cross over pipe piece for us with lifted trucks?

[BOTTLEDZ28]

I have a 6" lift in my Tahoe and I was unable to reinstall my front driveshaft due to interference with the ypipe on the drivers side. I came across a crossover pipe that I used a couple years ago and it worked perfect but now I need to buy it again and I cant find it anywhere. It bolts to the drivers exhaust manifold and instead of being shaped like an L, it has 2 45" bends in it to clear the driveshaft. I just cant find it anywhere!!!!

 

[mariodave]

I cut the existing pipe apart and welded it back together to make the 45. Cut the 90 part out, then cut it in half at the corner of the 90 to make your two 45's then weld it all back together. if you do it right you wont need any extra pipe. the driveshaft will now be under the exhaust pipe.