Wheel spacing info for lowered trucks

[Low_obs92]

what's up ppl any body know if I will have any issues running a 17x10 on my single cab long bed with a 4-6 drop or a 6-8 drop and a good tire size ? thanks

 

[RQ Jay]

Ridetech StreetGRIP 4/6 drop.

American Racing - Classic Torq Thrust II (5x127) (5x5)

Front
20x8 - OS: 0mm, BS: 4.5"
245/40R20 Nitto NT555 G2

Rear
20x10 - OS: +6mm, BS: 5.75"
275/40R20 Nitto NT555 G2

You must be registered for see images attach

You must be registered for see images attach

Got to ask.... how impressive is that ridetech suispension over a belltech 4/6 with their shocks?

 

[WILWAXU]

Got to ask.... how impressive is that ridetech suispension over a belltech 4/6 with their shocks?

I've only had the Ridetech stuff on this truck.

 

[RQ Jay]

I've only had the Ridetech stuff on this truck.

Sorry... I guess I meantto ask what you thought of the system?
Thanks

 

[WILWAXU]

Sorry... I guess I meantto ask what you thought of the system?
Thanks

I love it! I've put over 15K miles on the truck since the install, including the Hot Rod Power Tour. Checkout my build thread: https://www.gmt400.com/threads/swap-meet-slam.42821/

 

[Bryan Fagan]

Belltech 4-5 Front and 6 inch drop in rear. Riddler 650's 8.5x20 front wheels and 10x20 rears. 245/35R20 for the front and 275/35R20 for the rears. A minor rear fender lip roll and there she sits.


she sits. Before and after of course.

You must be registered for see images attach

You must be registered for see images attach

 

[jgreen16]

Belltech 4-5 Front and 6 inch drop in rear. Riddler 650's 8.5x20 front wheels and 10x20 rears. 245/35R20 for the front and 275/35R20 for the rears. A minor rear fender lip roll and there she sits.


she sits. Before and after of course.

I'm only going to be doing a 2/4 drop. Do you think the rear fender roll would be necessary on the 4-inch rear drop using the same wheel/tire package you're running?

 

[sewlow]

295/40-20's on a 2/4. Tons of room. No need to roll the rear lips.

You must be registered for see images attach

 

[scottcleaver]

So I want to change bolt pattern for better wheel choices. Dropping from 5x5 to 5x4.75 with a one inch thick adapter. With simple math I should just take 1 inch off my back space when oredering wheels? Below will be a very similar set up Front
20x8 - OS: 0mm, BS: 4.5"
245/40R20 Nitto NT555 G2

Rear
20x10 - OS: +6mm, BS: 5.75"
275/40R20 Nitto NT555 G2

 

[jonericfountain]

Belltech 4-5 Front and 6 inch drop in rear. Riddler 650's 8.5x20 front wheels and 10x20 rears. 245/35R20 for the front and 275/35R20 for the rears. A minor rear fender lip roll and there she sits.


she sits. Before and after of course.

You must be registered for see images attach

You must be registered for see images attach

Good Work. Love it