Vortec pump

[User_name]

Hey guys, planning on a vortec fuel pump for my 95 in the near future.
What parts will I need?
Will it be compatible with my sending unit?
Thinking about rebuilding the fpr as a precaution.
Anything I should know? Thanks
1995 c2500 5.7 nv4500

 

[PlayingWithTBI]

Hey guys, planning on a vortec fuel pump for my 95 in the near future.
What parts will I need?
Will it be compatible with my sending unit?

The ACDelco EP381 from a 96 truck is a direct replacement for your TBI pump. It comes with the hose rated for gas immersion as well as the O-ring(s) needed.

www.summitracing.com/parts/ado-ep381

ACDelco 25163473 ACDelco Electric Fuel Pumps | Summit Racing

Free Shipping - ACDelco Electric Fuel Pumps with qualifying orders of $109. Shop Fuel Pumps at Summit Racing.

www.summitracing.com

 

[User_name]

Thanks @PlayingWithTBI
Think I should get a new sending unit assembly as well? Fuel gauge acts fine but it would be a "while it's apart and up in my teeth" sorta thing

 

[User_name]

Also, as far as higher pressure fpr springs go, how high should I go for a stock 350? I was thinking along the lines of a 14-18 lb spring

 

[PlayingWithTBI]

Also, as far as higher pressure fpr springs go, how high should I go for a stock 350? I was thinking along the lines of a 14-18 lb spring

For a stock TBI setup, I wouldn't go much over 14 or 15 unless you have the means to tune your VE tables.