U-bolt application for stock

[Schurkey]

I used my 10-bolt 1500 springs with the 14-bolt axle.

I don't remember doing anything to the springs--and therefore the saddle on top--when I changed axles.

The bottom plate is absolutely different, however.

 

[stutaeng]

Sorry, I was thinking that plate being completely different... it's actually the bottom plate. The one with holes is the one I was thinking about.

 

[Z71_Zimmerly]

I don't believe so. The outer tube on the 14 bolt/9.5" is larger than the 10 bolt. You won't be able to align the holes of the brakets with the bolts.

Just an update, all went well. The top plates worked just fine too. Thanks guys

 

[packer0440]

Not sure if anyone is still wondering about this, but I believe that the only difference between the 9200# and 9000# GVWR on the 3500 SRW is that the 9200# is for 4wd, 9000# for 2wd. Other than that should be the same.

 

[Caman96]

I installed a rear leaf suspension kit from ATS Springs this past summer on my 96 K1500. My originals were 9/16 and kit said it would come with 9/16 but what arrived was 5/8 . This came with kit and gives torque specs.

You must be registered for see images attach

You must be registered for see images attach