timberjacked
Newbie
Yes sir that’s how I have the throttle stop screw set! Just enough so the throttle doesn’t feel sticky.What bcc do you have? 4 digit letter code. Should be on memcal and ECU.
You don't have to be approved for gear head forum, you just have to post a thread in the introduction when you sign up.
Throttle stop screw should be just where it holds the throttle from closing all the way. Just where it makes a Small movement after contact and throttle blade not sticking. Idle rpm is controlled by the idle air control valve that bypasses the throttle blade, and is set to a certain rpm.
Hope that helps.
My BCC is BDKA
And the gear head forum…. I should say that the “confirm your email” email never came through