Tps install

[PlayingWithTBI]

Most have very little to no adjustment though. such as the one you pictured would not move much at all.

You can elongate the mounting holes with a Dremel tool to get the little bit you may need.

 

[TagAllen]

This is the adjustable style. If you need it.
Edelbrock 36018

You must be registered for see images attach

https://www.summitracing.com/parts/...1733674160012&utm_content=GSAPI+5ba26345ab498

 

[dave s]

You can elongate the mounting holes with a Dremel tool to get the little bit you may need.

As per instructions I found on here, that is how I did mine. Worked too. Only way I could get it in spec.

 

[udidwht]

When I replaced mine a few years back 94 GM P-30 (AC Delco) I simply removed both the mounting screws. Then mounted the new one. Had to wiggle it left/right a bit to get it onto the shaft of the TBI (due to being slotted). Once on. Started and runs perfect.