Tbi 454 engine swap and now injectors not firing

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Hotrod Bowtie

Newbie
Joined
Jun 18, 2020
Messages
1
Reaction score
0
Location
Mississippi
Anyone know where I can find the schematic and the plug identification on the wiring harness from a 1990 3500 454 ? I removed a 454/4l80 out of a 3500 and computer with the engine harness and now I have a couple plugs that I am not sure where the go or they could have not been used . My problem is no power to fuel pump checking at the fuse (fuse good but no power on either side ) can put power to fuse with jumper and pump works but the injectors are not firing . I cranked engine before I pulled thanks in advance for any inside info put it in a 91 sport truck
 

thinger2

I'm Awesome
Joined
Jul 6, 2019
Messages
1,562
Reaction score
3,936
Location
Tacoma
Somebody posted a whole bunch of wiring diagrams on here not too long ago.
Hopefully they can see this and put the link again. Ill see if I can find it.
Is the ecm fuse good?
 
Top