Tail light circuit boards

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

someotherguy

I'm Awesome
Joined
Sep 28, 2013
Messages
9,803
Reaction score
14,168
Location
Houston TX
I don't know how you're putting bulbs in there without boards.... they look like they're ready for board to be installed.

Edit: It looks like the main pictures are wrong. I looked at the customer pictures, and they are more like what deadbeat posted. Doesn't the boxy area interfere with the mounting?

Twist-in sockets, then the connector down at the bottom of the pic just plugs into the factory harness.

You must be registered for see images attach


Richard
 

454cid

Sooper Pooper
Joined
Sep 5, 2010
Messages
8,004
Reaction score
8,888
Location
The 26th State
Twist-in sockets, then the connector down at the bottom of the pic just plugs into the factory harness.

You must be registered for see images attach


Richard

Right, I got that.... but the link he posted didn't show this. The picture looked just like the plate was missing.
 

df2x4

4L60E Destroyer
Staff member
Super Moderator
Joined
Mar 1, 2012
Messages
11,159
Reaction score
12,699
Location
Missouri
Yeah, the second image in that first Amazon link is wrong. Not sure what's up with that. Mine are like the picture someotherguy posted.
 
Top