stepside bed supports from a squarebody?

[Prius454]

anyone know if the bed supports for a sqaurebody stepside can be used to repair one of our stepsides? i have seen some pics of squarebody stepside boxes on obs trucks so i know its not that far fetched . just wodering if this would be easier than making my own .

 

[Caman96]

These are for a long bed, but tweaking a few of these might be easier than manufacturing some. Not cheap though. Time isn’t either.

https://www.amazon.com/gp/aw/d/B07ZGC91KT/ref=ox_sc_saved_image_8?smid=ATVPDKIKX0DER&psc=1

 

[TechNova]

I used fleetside rails and simply cut some off of each end for the shorter ones a stepside needs.
I replaced one rail at a time using a tram bar to pre and post measure the locations based on the bolt holes in the rear rail

 

[Caman96]

I used fleetside rails and simply cut some off of each end for the shorter ones a stepside needs.
I replaced one rail at a time using a tram bar to pre and post measure the locations based on the bolt holes in the rear rail

This^