Silvia

[Channeled 91]

well... spent time grinding off a ton of bondo. 1/4 inch thick for no reason.

You must be registered for see images attach

You must be registered for see images attach

I want to raise the bed for about 10 inches, and replace the roll pan. Not to mention level the bed. the rear passenger side is 16 inches from floor to top of bed. The driver side is 14 inches from floor to top of bed. Driver side of bed has to move up 2 inches.

You must be registered for see images attach

 

[Channeled 91]

Updated dash design

You must be registered for see images attach

 

[Channeled 91]

Lifted and lights working.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Channeled 91]

Grinding off all the bondo from the previous owners.

You must be registered for see images attach

You must be registered for see images attach

 

[wiscomick]

Have you considered just getting a different box at this point? That thing is annihilated.

 

[Channeled 91]

Have you considered just getting a different box at this point? That thing is annihilated.

Yes I have.

 

[Channeled 91]

the latest bed design.

You must be registered for see images attach

 

[Channeled 91]

chiseling off some more bondo laid by the original builder.

You must be registered for see images attach

Tacked up the tail gate shaver filler. Just have to skim it with filler and make it smooth.

You must be registered for see images attach

 

[Supercharged111]

Check out the bed in relation to the cab. Looks higher on the right side than the left up front. Could be a tweaked frame rail. If you back into something it pushed everything up where the frame has that S.

 

[Needs15]

I would really be checking the frame out something seems fishy there. Just odd why they would only raise driver side of the box floor and not passenger side, hopefully it's just a bad box. Hate to see you put all this work in and have a bad frame, just my opinion.