sas minimum lift

[bluedxj]

silver98 do you have a build thread? or pics of your set up?

 

[silver98z71]

silver98 do you have a build thread? or pics of your set up?

I do. It is the only thread I have started on this forum. Just search my started threads.

 

[cat-chevymech]

Ok heres the run down i rebuilt my ifs spent 580 doing it myself and a year or so and 100k later two broken cvs 6 tierods and i allready need to do the balljoints over im tired of this i have a 60 in my garage and am having some front springs made and bought sky mfg brackets for a total of 4 in lift.

Yes for 3k i can build my ifs bulletproof with 33s and never worry about breakage but then i still have more parts to replace when they wear out vs a king pin 60 that has few parts and parts can be sourced pretty easy



81 w250 clubcab 318mag 300hp d60F&R 4.11 35s
94chevy silverado 350 4l60 325hp 3.73 32s

sent by telegraph from my w250

 

[MSCustoms]

For those of you with a 6" SAS, what is your suspension travel up and down?

 

[thz71]

Holy thread dig batman

 

[MSCustoms]

I try

 

[silver98z71]

For those of you with a 6" SAS, what is your suspension travel up and down?

I have about 4" up travel when my bumpstops hit, it probably has 2" until the ubolts contact the frame and/or the differential hits the pitman arm. As far as down travel goes, I'm using every bit of a 11" travel shock.

 

[MSCustoms]

I have about 4" up travel when my bumpstops hit, it probably has 2" until the ubolts contact the frame and/or the differential hits the pitman arm. As far as down travel goes, I'm using every bit of a 11" travel shock.

Perfect, thanks.

 

[Jacob6Lug]

You must be registered for see images attach

You must be registered for see images attach

What SAS kit did you use and what kind of axle. About how many inches of lift, thanks

 

[BowtieBrody]

What SAS kit did you use and what kind of axle. About how many inches of lift, thanks

Holy thread dig.
I read through his posting on an S10 forum, apparently he used home-fabbed shackles, stock 47" Chevy square body leafs, and a Chevy D44 he re-tubed to a driver's side drop.

Here's the link to the build, there's only a little section dedicated to that truck though.
http://www.s10forum.com/forum/f221/rabbits-01-crew-cab-s10-sfa-dana-44s-434056/index13.html