Rocky

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

PNWGMT400

Newbie
Joined
Feb 14, 2019
Messages
33
Reaction score
5
Location
97055
Here's the story of a 93 W/T named Rocky, enjoy

You must be registered for see images attach
 

PNWGMT400

Newbie
Joined
Feb 14, 2019
Messages
33
Reaction score
5
Location
97055
Update. I found a donor truck a 92 454 with a bad body but only 128 on the ticker. Hoping cause I have whole truck this will be a plug and play.
Future plans are for a th400 and ridetech coilovers front and rear.
Now that I have a donor this project should start moving forward.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

PNWGMT400

Newbie
Joined
Feb 14, 2019
Messages
33
Reaction score
5
Location
97055
This week was pretty much just paperwork I got into the DMV and got the title for the the donor. So with that in hand I feel better about taking it apart.
 

PNWGMT400

Newbie
Joined
Feb 14, 2019
Messages
33
Reaction score
5
Location
97055
Only a few hours to play, I need better light. Front end is removed. Tomorrow hopefully 4.3 and 4l60 will no longer be living there.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

PNWGMT400

Newbie
Joined
Feb 14, 2019
Messages
33
Reaction score
5
Location
97055
4.3 has a small foot print in the bay.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

PNWGMT400

Newbie
Joined
Feb 14, 2019
Messages
33
Reaction score
5
Location
97055
What a mess. Guess I need to see how the 454 is with it's power steering lines. Seems like a radiator of sorts would be better than a mile of tubing.

You must be registered for see images attach
 

PNWGMT400

Newbie
Joined
Feb 14, 2019
Messages
33
Reaction score
5
Location
97055
Just picked a th400 up from Mutch Brothers Garage. This came outta of a 88 1ton service truck 454. So should be happy behind one again.

You must be registered for see images attach
 

PNWGMT400

Newbie
Joined
Feb 14, 2019
Messages
33
Reaction score
5
Location
97055
The axle I'd liked to use, 97 14bolt sf 9.5 4wd. Problem is it is 3 inch wider going to look into cutting it down to a 2wd version.
 

PNWGMT400

Newbie
Joined
Feb 14, 2019
Messages
33
Reaction score
5
Location
97055
Been awhile since last update due to surgery and other life issues. So here's a little update both trucks are now inside and got the front end off the donor rig. Next up will be removing the 4.3 in Rocky and prep him for his new heart.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 
Top