Rear disc conversion not needed.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mwyson

Newbie
Joined
Apr 10, 2021
Messages
10
Reaction score
8
Location
Saint George
I have a 1990 k2500. My brakes have always sucked, especially the rear. The other day I mistakenly ordered 2000ish 8600lb front calipers. They bolted right on. My front brakes were locking up so I thought something was wrong with the back. I replaced everything including the wheel cylinders. Still no rear braking, it seemed. So I came upon a post that said to use the dually wheel cylinders. OMG!!! My brakes now work as good as my all wheel disc Mercedes. My truck is always loaded with 1,500lbs of tools and I have never had sufficient braking to the rear till now. Thank goodness I found that post!
 

Schurkey

For a pacifist, I sure am a radical mother...
Supporting Member
Joined
Jan 14, 2018
Messages
17,632
Reaction score
27,277
Location
The Seasonally Frozen Wastelands
I have a 1990 k2500. My brakes have always sucked, especially the rear. The other day I mistakenly ordered 2000ish 8600lb front calipers.
Iron caliper, single-piston? Piston size is 3 5/32? Same as what I have on my '97 K2500. I just bought a caliper today, as I broke the bleeder screw on the right side.


They bolted right on. My front brakes were locking up so I thought something was wrong with the back. I replaced everything including the wheel cylinders. Still no rear braking, it seemed. So I came upon a post that said to use the dually wheel cylinders.
What size are the standard wheel cylinders, and what size are the Dually cylinders?
 

Vikingdude

I'm Awesome
Joined
Oct 26, 2020
Messages
333
Reaction score
612
Location
Whitehorse, Yukon
My research on Rock auto leads me to believe the single wheel cylinders are 1 1/16" while the dual rear wheel setup uses a 1 3/16" wheel cylinder.
 

454cid

Sooper Pooper
Supporting Member
Joined
Sep 5, 2010
Messages
10,525
Reaction score
15,291
Location
The 26th State
My research on Rock auto leads me to believe the single wheel cylinders are 1 1/16" while the dual rear wheel setup uses a 1 3/16" wheel cylinder.

Yes, and I actually found the guts from my original SRW cylinder yesterday..... has 1-1/16 stamped on it. For some reason I saved the guts and tossed the bore.

I have new SRW and DRW cylinders for it. I'm hoping to rebuild the rear brakes this summer and plan on installing the 1-3/16" DRW cylinders.
 

Supercharged111

Truly Awesome
Air Force SpaceX Member
Joined
Aug 20, 2015
Messages
17,026
Reaction score
26,980
Location
Da U.P.
That's weird, my dad had a 92 K2500 with 14bff and it would lock the rears before the fronts.
 

Reluctanse

I'm Awesome
Joined
Jan 21, 2017
Messages
550
Reaction score
967
Location
Oregon
Yes, and I actually found the guts from my original SRW cylinder yesterday..... has 1-1/16 stamped on it. For some reason I saved the guts and tossed the bore.

I have new SRW and DRW cylinders for it. I'm hoping to rebuild the rear brakes this summer and plan on installing the 1-3/16" DRW cylinders.
were you ever able to do this? did the dually wheel cylinders swap right in place?
 

454cid

Sooper Pooper
Supporting Member
Joined
Sep 5, 2010
Messages
10,525
Reaction score
15,291
Location
The 26th State
were you ever able to do this? did the dually wheel cylinders swap right in place?

Unfortunately, no I have not touched the rear brakes yet. I have 5 vehicles, including the truck, now. I hardly drive it at all. I was just thinking tonight at work, that I really need to make the truck a priority. I've got things I've been planning for years still undone. The brakes are one of those things.
 

Latest posts

Forum statistics

Threads
78,076
Messages
1,644,609
Members
81,185
Latest member
Alan9ari
Top