Rear Disc Brake Conversion Bracket

[90lsx]

So I found someone finally found a link to the place where I picked my rear disc brake conversion bracket from. They sell you the bracket only and give you a parts list so you can source the parts yourself. This bracket is for 5 & 6 lug trucks.

https://www.cunninghammachine.com/speed-shop/

For the brake lines I ran these.

https://www.littleshopmfg.com/braided-stainless-hoses-for-dbc-kits/

You must be registered for see images attach

You must be registered for see images attach

 

[[email protected]]

Nice Clean work ,I am doing this also on my 1997 Tahoe Good luck with yours

 

[90lsx]

Nice Clean work ,I am doing this also on my 1997 Tahoe Good luck with yours

I finished my swap already came out really nice I like it a whole lot better then my drums I had on there! Stops 1,000,000 times better

 

[Knuckle Dragger]

Any change you care to share the rotor part number?

 

[90lsx]

@Knuckle Dragger

5 lug or 6 lug?

 

[90lsx]

6 lug 5977RGS / 5568

5 lug 5645OR / ACDELCO 18A656A

 

[b454rat]

What about the calipers?

 

[thegawd]

@90lsx are these calipers from the 1980 Eldorado or? Theres no parking brake on this set up is there? I'm very curious, extremely interested but very hesitant to start a swap like this. I was trying to find tha parts list on their site... care to share the entire list? Haha

Looks great!

Al

 

[90lsx]

@b454rat

Right Caliper - C552 / 18-4301
Left Caliper - C553 / 18-4302


@thegawd

I am not sure about the calipers with parking brake. I would imagine that they are the eldo calipers.

 

[thegawd]

Thanks so much man I really appreciate you sharing this info.

Al